USA INDUSTRIALS Schedule 40 Brass Pipe Nipple, 1/4 in NPT, 3 in, PTFE Sealant
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass pipe nipple threaded on both ends with Male NPT x Male NPT connections, a 1/4 in nominal pipe size, and a 3 in overall length. It features PTFE thread sealant…
SKU 3G-OTH-649776
Also listed as: ZUSAPF21841 · ZUSA PF 21841
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass pipe nipple threaded on both ends with Male NPT x Male NPT connections, a 1/4 in nominal pipe size, and a 3 in overall length. It features PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F and a maximum steam pressure of 282 psi @ 450 °F.
Frequently Asked Questions
What is a USA INDUSTRIALS brass pipe nipple used for?
This Schedule 40 brass pipe nipple connects two male NPT threaded fittings in plumbing, pneumatic, or low-pressure steam systems. Its 1/4 in nominal size and 3 in length suit tight spaces where a short, corrosion-resistant brass connector is needed.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-21841?
The ZUSA-PF-21841 is a 1/4 in NPT brass pipe nipple, 3 in overall length, threaded on both ends with Male NPT x Male NPT connections. It has PTFE thread sealant, a maximum operating pressure of 125 psi @ 72°F, and a maximum steam pressure of 282 psi @ 450 °F.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-21841 worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS ZUSA-PF-21841 brass pipe nipple worldwide. We handle full logistics and customs clearance, ensuring you receive the correct Schedule 40 threaded nipple for your industrial application.
How to install a brass pipe nipple with PTFE thread sealant?
Apply additional PTFE tape or pipe dope to the male NPT threads for a leak-free seal. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Avoid over-tightening to prevent cracking the brass or damaging threads.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.