USA INDUSTRIALS Schedule 40 Brass Pipe Nipple
USA INDUSTRIALS Schedule 40 Brass Pipe Nipple (MPN ZUSA-PF-21857) is threaded on both ends with Male NPT x Male NPT connections, 1/8 in nominal pipe size, and 8 in overall length. It features PTFE thread sealant…
SKU 3G-OTH-649906
Also listed as: ZUSAPF21857 · ZUSA PF 21857
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
USA INDUSTRIALS Schedule 40 Brass Pipe Nipple (MPN ZUSA-PF-21857) is threaded on both ends with Male NPT x Male NPT connections, 1/8 in nominal pipe size, and 8 in overall length. It features PTFE thread sealant, with a maximum operating pressure of 125 psi @ 72°F and maximum steam pressure of 373 psi @ 450 °F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 brass pipe nipple used for?
This brass pipe nipple connects two male NPT threaded fittings in low-pressure fluid, gas, or steam lines. Common in plumbing, HVAC, and instrumentation systems where corrosion resistance and a leak-tight seal are required. 3G Electric supplies this component across 14 industrial departments.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21857 pipe nipple?
This Schedule 40 brass nipple has a 1/8 in nominal pipe size, 8 in overall length, and Male NPT x Male NPT connections. Maximum operating pressure is 125 psi @ 72°F; maximum steam pressure is 373 psi @ 450 °F. PTFE thread sealant is pre-applied.
Where to buy USA INDUSTRIALS brass pipe nipples worldwide?
3G Electric sources and delivers USA INDUSTRIALS brass pipe nipples to worldwide locations. We handle full logistics, customs clearance, and delivery coordination. Contact our team for a quote on the ZUSA-PF-21857 or other Schedule 40 brass fittings.
How to install a brass pipe nipple with PTFE thread sealant?
Ensure threads are clean and dry. Apply additional PTFE tape or paste if needed, wrapping in the direction of threading. Hand-tighten the nipple into the female port, then use a wrench for an additional 1-2 turns. Do not overtighten to avoid cracking the brass.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.