USA INDUSTRIALS Schedule 40 Brass Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 Brass pipe nipple with PTFE thread sealant, threaded on both ends (Male NPT x Male NPT), seamless, with a nominal pipe size of 1 1/4 in and overall length of 3 1/2 in…
SKU 3G-OTH-649863
Also listed as: ZUSAPF21885 · ZUSA PF 21885
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 Brass pipe nipple with PTFE thread sealant, threaded on both ends (Male NPT x Male NPT), seamless, with a nominal pipe size of 1 1/4 in and overall length of 3 1/2 in. It has a maximum operating pressure of 125 psi @ 72°F and a maximum steam pressure of 796 psi @ 300 °F (MPN ZUSA-PF-21885).
Frequently Asked Questions
What is a USA INDUSTRIALS brass pipe nipple used for?
This Schedule 40 brass pipe nipple connects two male NPT threaded fittings in plumbing, HVAC, and industrial piping systems. It handles water, air, and steam up to 125 psi @ 72°F or 796 psi @ 300°F, with PTFE sealant pre-applied for leak resistance.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-21885 pipe nipple?
This brass pipe nipple has a 1 1/4 in nominal pipe size, 3 1/2 in overall length, threaded on both ends with Male NPT x Male NPT connections. It is seamless, rated for 125 psi @ 72°F operating pressure and 796 psi @ 300°F steam pressure, with PTFE thread sealant.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, regardless of location.
How to install a brass pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use a wrench for final snugging—avoid overtightening to prevent cracking the brass. Always test the joint at operating pressure before full service.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.