USA INDUSTRIALS Schedule 40 Brass Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass pipe nipple, threaded on both ends with Male NPT x Male NPT connections, a 3/4 in nominal pipe size, and an 18 in overall length. It features PTFE thread sealant…
SKU 3G-OTH-649895
Also listed as: ZUSAPF21936 · ZUSA PF 21936
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 brass pipe nipple, threaded on both ends with Male NPT x Male NPT connections, a 3/4 in nominal pipe size, and an 18 in overall length. It features PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F and a maximum steam pressure of 953 psi @ 300 °F.
Frequently Asked Questions
What is a USA INDUSTRIALS brass pipe nipple used for?
This Schedule 40 brass pipe nipple connects two male NPT fittings in plumbing, steam, or compressed-air systems. Its 3/4 in nominal size and 18 in length suit tight spaces where a short, corrosion-resistant brass nipple is needed for water, gas, or low-pressure steam lines.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-21936?
The USA INDUSTRIALS ZUSA-PF-21936 is a Schedule 40 brass pipe nipple with 3/4 in nominal pipe size, 18 in overall length, and Male NPT x Male NPT threads on both ends. It has PTFE thread sealant, a maximum operating pressure of 125 psi @ 72°F, and a maximum steam pressure of 953 psi @ 300 °F.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-21936 worldwide?
3G Electric supplies the USA INDUSTRIALS ZUSA-PF-21936 brass pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 nipple.
How to install a brass pipe nipple with PTFE sealant?
Apply pipe joint compound or PTFE tape to the male NPT threads before assembly. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1–2 turns. Avoid overtightening to prevent cracking the brass. For steam service, verify the system pressure stays below 953 psi @ 300 °F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 brass pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.