USA INDUSTRIALS Schedule 40 Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with PTFE thread sealant, featuring a 1 1/4 in nominal pipe size, 4 in length, and Male NPT x Male NPT connections. It is welded and rated for…
SKU 3G-OTH-483659
Also listed as: ZUSAPF22212 · ZUSA PF 22212
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with PTFE thread sealant, featuring a 1 1/4 in nominal pipe size, 4 in length, and Male NPT x Male NPT connections. It is welded and rated for a maximum operating pressure of 125 psi @ 72°F (MPN ZUSA-PF-22212).
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 pipe nipple with PTFE used for?
This pipe nipple connects male NPT threaded pipes in low-pressure industrial plumbing, pneumatic, and fluid-handling systems. The PTFE thread sealant provides a reliable leak-resistant seal without additional tape or compound, making it suitable for water, air, and non-corrosive media up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22212 pipe nipple?
This Schedule 40 welded pipe nipple has a 1 1/4 in nominal pipe size, 4 in length, and Male NPT x Male NPT connections. It includes factory-applied PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F. The brand is USA INDUSTRIALS, MPN ZUSA-PF-22212.
Where to buy USA INDUSTRIALS pipe nipples with PTFE worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial sourcing partner, we handle full logistics and customs clearance to ensure your order arrives at your facility. Contact us for availability and lead time on this MPN ZUSA-PF-22212 Schedule 40 nipple.
How to install a USA INDUSTRIALS pipe nipple with PTFE sealant?
Ensure threads are clean and free of debris. Hand-tighten the nipple into the female NPT port, then use a wrench for an additional 1–2 turns. Do not overtighten, as the factory-applied PTFE sealant is designed to seal without tape. Test the joint at operating pressure to verify no leaks.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.