USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22364) is a Schedule 40 galvanized steel nipple with a 1/4 in nominal pipe size, 8 in length, and male NPT threads on both ends. It features pre-applied PTFE thread…
SKU 3G-OTH-464515
Also listed as: ZUSAPF22364 · ZUSA PF 22364
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22364) is a Schedule 40 galvanized steel nipple with a 1/4 in nominal pipe size, 8 in length, and male NPT threads on both ends. It features pre-applied PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/4 in NPT pipe nipple connects two female-threaded fittings in low-pressure water, air, or gas lines. The galvanized steel resists corrosion, and the pre-applied PTFE sealant simplifies installation. 3G Electric supplies this nipple for industrial plumbing, pneumatic, and HVAC applications worldwide.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22364 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22364 is a Schedule 40 galvanized steel nipple, 8 in long, with 1/4 in NPT male threads on both ends. It has a maximum operating pressure of 125 psi @ 72°F and includes pre-applied PTFE thread sealant. 3G Electric sources this genuine part for global delivery.
Where to buy a USA INDUSTRIALS pipe nipple worldwide?
3G Electric supplies the USA INDUSTRIALS ZUSA-PF-22364 pipe nipple to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this Schedule 40 galvanized nipple with PTFE sealant.
How to install a threaded pipe nipple with PTFE sealant?
Clean both male threads and the female fitting. Apply pipe dope or additional PTFE tape over the pre-applied sealant if needed. Hand-tighten the nipple, then use a wrench for a final 1-2 turns. Do not overtighten. 3G Electric provides this nipple for reliable connections in industrial systems.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
