USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 10 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied…
SKU 3G-OTH-464440
Also listed as: ZUSAPF22402 · ZUSA PF 22402
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 10 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied, rated for a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, or water systems. Its galvanized steel construction resists corrosion, and the PTFE sealant ensures a leak-tight joint at pressures up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22402 pipe nipple?
This Schedule 40 pipe nipple has a 1 1/4 in nominal pipe size, 10 in length, and galvanized steel welded construction. It uses Male NPT x Male NPT connections with PTFE thread sealant, rated for 125 psi @ 72°F maximum operating pressure.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized nipple.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug seal without over-tightening. Test the joint at operating pressure.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
