USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple (SKU 3G-OTH-464408) is a Schedule 40, galvanized steel nipple with a 2-inch nominal pipe size and 18-inch length, threaded on both ends with Male NPT x Male NPT connections and…
SKU 3G-OTH-464408
Also listed as: ZUSAPF22424 · ZUSA PF 22424
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple (SKU 3G-OTH-464408) is a Schedule 40, galvanized steel nipple with a 2-inch nominal pipe size and 18-inch length, threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE thread sealant. It has a maximum operating pressure of 125 psi at 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 2-inch NPT pipe nipple connects two male-threaded fittings in industrial plumbing, compressed air, or water systems. The galvanized steel resists corrosion, and the pre-applied PTFE sealant ensures a leak-tight joint at pressures up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS 2-inch pipe nipple?
This Schedule 40 nipple has a 2-inch nominal pipe size, 18-inch length, galvanized steel construction, and Male NPT x Male NPT connections. It includes pre-applied PTFE thread sealant and is rated for a maximum operating pressure of 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a threaded pipe nipple with PTFE sealant?
Apply pipe dope or additional PTFE tape over the pre-applied sealant for extra security. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1–2 turns. Avoid overtightening to prevent cracking the galvanized coating.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
