USA INDUSTRIALS Pipe Nipple: 3/4 in Nominal Pipe Size, 2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 galvanized steel pipe nipple with a 3/4 in nominal pipe size and 2 in length, threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE thread…
SKU 3G-OTH-464475
Also listed as: ZUSAPF22452 · ZUSA PF 22452
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 galvanized steel pipe nipple with a 3/4 in nominal pipe size and 2 in length, threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT fittings in plumbing, pneumatic, or low-pressure fluid systems. It is commonly used in water, air, and gas lines where a short, threaded connection is needed. The pre-applied PTFE sealant simplifies installation.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22452 pipe nipple?
This Schedule 40 pipe nipple has a 3/4 in nominal pipe size, 2 in length, and galvanized steel construction. It features Male NPT x Male NPT threads with pre-applied PTFE sealant. Maximum operating pressure is 125 psi @ 72°F. The manufacturer part number is ZUSA-PF-22452.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we provide genuine parts like the ZUSA-PF-22452 with reliable lead times. Contact us for a quote.
How to install a threaded pipe nipple with PTFE sealant?
Ensure threads are clean and dry. Apply pipe thread compound or use the pre-applied PTFE sealant as supplied. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Do not overtighten. Test the joint at operating pressure to verify no leaks.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
