USA INDUSTRIALS Schedule 40 Threaded Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, fully threaded aluminum pipe nipple with a 2 1/2 in nominal pipe size and 2 1/2 in overall length. It features Male NPT x Male NPT connections on both ends and a…
SKU 3G-OTH-652370
Also listed as: ZUSAPF6082 · ZUSA PF 6082
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, fully threaded aluminum pipe nipple with a 2 1/2 in nominal pipe size and 2 1/2 in overall length. It features Male NPT x Male NPT connections on both ends and a maximum operating pressure of 125 psi @ 72°F.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple connects two male NPT threaded pipes or fittings in low-pressure fluid or air systems. It is commonly used in industrial plumbing, pneumatic lines, and general piping applications where corrosion resistance and lightweight construction are needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-6082 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-6082 is a fully threaded Schedule 40 aluminum pipe nipple with a 2 1/2 in nominal pipe size and 2 1/2 in overall length. It has Male NPT x Male NPT connections on both ends and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 aluminum nipple with Male NPT threads.
How to install a fully threaded aluminum pipe nipple?
Apply thread sealant or PTFE tape to both male NPT ends before threading into female fittings. Tighten by hand, then use wrenches on the nipple's hex section—avoid over-tightening to prevent cracking the aluminum. Ensure operating pressure stays below 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
