USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe Nipple
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple, threaded on both ends and seamless, with a 1 1/4 in nominal pipe size and 4 in overall length. It features Male NPT x Male NPT connections and a…
SKU 3G-OTH-650893
Also listed as: ZUSAPF6161 · ZUSA PF 6161
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 aluminum pipe nipple, threaded on both ends and seamless, with a 1 1/4 in nominal pipe size and 4 in overall length. It features Male NPT x Male NPT connections and a maximum operating pressure of 125 psi @ 72°F (MPN ZUSA-PF-6161).
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple connects two male NPT threaded fittings in low-pressure fluid or air systems. Its 1 1/4 in nominal size and 4 in length suit plumbing, pneumatic, and general industrial applications where corrosion resistance and lightweight material are needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-6161 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-6161 is a seamless aluminum pipe nipple with 1 1/4 in nominal pipe size, 4 in overall length, and Male NPT x Male NPT threaded connections. Maximum operating pressure is 125 psi @ 72°F. It is Schedule 40 and threaded on both ends.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-6161 or similar aluminum pipe nipples for your application.
How to install a threaded aluminum pipe nipple?
Apply thread sealant or PTFE tape to both male NPT ends. Hand-tighten the nipple into the female fittings, then use wrenches on the nipple's hex section for final torque—avoid over-tightening to prevent thread damage. Ensure system pressure stays below 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
