VICTAULIC Series 858 Rigid Clamp Coupling
The Victaulic Series 858 Clamp Coupling is a rigid, bolted ductile-iron clamp for grooved Schedule 80 pipes, sized 10 in x 8 in with a 16 3/4 in overall length. Finished with blue enamel and certified to NSF/ANSI/CAN…
SKU 3G-OTH-651874
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- Warning appliesProp 65 warning
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The Victaulic Series 858 Clamp Coupling is a rigid, bolted ductile-iron clamp for grooved Schedule 80 pipes, sized 10 in x 8 in with a 16 3/4 in overall length. Finished with blue enamel and certified to NSF/ANSI/CAN 372 for potable water, it supports a maximum operating pressure of 175 psi.
Frequently Asked Questions
What is the Victaulic Series 858 clamp coupling used for?
The Victaulic Series 858 clamp coupling is used to join grooved Schedule 80 pipes in potable water systems. Its rigid, bolted ductile-iron design provides a leak-tight connection for 10 in x 8 in fittings, certified to NSF/ANSI/CAN 372 for drinking water safety.
What are the specifications of the Victaulic LF96858HP0 clamp coupling?
The Victaulic LF96858HP0 is a rigid, bolted ductile-iron clamp coupling with a 10 in x 8 in fitting pipe size, 16 3/4 in overall length, blue enamel finish, and maximum operating pressure of 175 psi. It meets NSF/ANSI/CAN 372 for potable water and is part of Series 858.
Where to buy Victaulic clamp couplings worldwide?
3G Electric supplies Victaulic clamp couplings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver the Series 858 and other Victaulic products to your site, ensuring compliance with local regulations.
How to install a Victaulic rigid clamp coupling?
To install a Victaulic rigid clamp coupling, ensure pipe ends are clean and grooved per Victaulic specifications. Place the gasket over the pipe ends, then position the clamp halves and tighten bolts evenly to the recommended torque. Verify alignment and pressure rating before system startup.
VICTAULIC Products
3G Electric supplies VICTAULIC clamps for grooved schedule 80 pipes & pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.