WEATHERHEAD 7000 Series Ermeto Flareless Bite-Type Steel
The WEATHERHEAD Compression Tee Fitting (MPN 7605X16X16X16) is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, sized 1 in OD x 1 in OD x 1 in Pipe Size with a maximum operating pressure…
SKU 3G-OTH-469753
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The WEATHERHEAD Compression Tee Fitting (MPN 7605X16X16X16) is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, sized 1 in OD x 1 in OD x 1 in Pipe Size with a maximum operating pressure of 2,500 psi. 3G Electric interprets demand for this OEM-sourced component across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is a WEATHERHEAD Compression Tee Fitting used for?
A WEATHERHEAD Compression Tee Fitting is used to branch hydraulic or pneumatic tubing lines in high-pressure industrial systems. It creates a leak-tight, flareless bite-type connection on steel tubing, commonly applied in fluid power, mobile equipment, and process piping where reliable sealing up to 2,500 psi is required.
What are the specifications of the WEATHERHEAD 7605X16X16X16?
The WEATHERHEAD 7605X16X16X16 is a 7000 Series Ermeto flareless bite-type steel compression tee fitting. It has a 1 in OD tube size on all three ports and a 1 in pipe size, with a maximum operating pressure of 2,500 psi. The fitting is made of steel and designed for high-pressure hydraulic applications.
Where to buy WEATHERHEAD compression fittings worldwide?
3G Electric supplies WEATHERHEAD compression fittings worldwide, including the 7605X16X16X16 tee. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source this OEM component for your hydraulic or pneumatic system needs.
How to install a WEATHERHEAD flareless bite-type compression fitting?
To install a WEATHERHEAD flareless bite-type fitting, cut tubing square, deburr, and lubricate the ferrule. Insert tubing into the fitting until it bottoms, then tighten the nut finger-tight. Mark the nut, then tighten an additional 1 to 1.25 turns with a wrench to set the bite ring. Do not overtighten.
Used in
Common applications for WEATHERHEADWEATHERHEAD Products
3G Electric supplies WEATHERHEAD flareless bite-type steel compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
