WEATHERHEAD A660 Brass Straight-Body Needle Valve, 1/8 in, Compression x MIP
The WEATHERHEAD A660 is a brass straight-body needle valve with an inline valve body, designed for water media. It features a compression connection on side 1 and a male IPS connection on side 2, with a 1/8 in pipe…
SKU 3G-OTH-445889
Also listed as: A 660 · A-660
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The WEATHERHEAD A660 is a brass straight-body needle valve with an inline valve body, designed for water media. It features a compression connection on side 1 and a male IPS connection on side 2, with a 1/8 in pipe size and a metal seal material.
Frequently Asked Questions
What is the WEATHERHEAD A660 needle valve used for?
The WEATHERHEAD A660 needle valve is used to precisely regulate water flow in industrial piping systems. Its brass straight-body inline design with compression and MIP connections makes it suitable for water media applications where reliable shut-off and fine flow control are required.
What are the specifications of the WEATHERHEAD A660 needle valve?
The WEATHERHEAD A660 is a brass inline needle valve with a 1/8 in pipe size. It features a compression connection on side 1 and a male IPS (MIP) connection on side 2. The seal material is metal, and it is designed for water media. The manufacturer part number is A660.
Where to buy the WEATHERHEAD A660 needle valve worldwide?
You can source the WEATHERHEAD A660 needle valve worldwide through 3G Electric. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this brass needle valve.
How to install the WEATHERHEAD A660 needle valve?
To install the WEATHERHEAD A660 needle valve, ensure the pipe ends are clean and apply thread sealant to the male IPS connection. Tighten the compression nut on side 1 securely, but avoid over-tightening to prevent damage. Always verify the valve is fully open before system pressurization.
Used in
Common applications for WEATHERHEADWEATHERHEAD Products
3G Electric supplies WEATHERHEAD brass straight-body needle valves. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.