WILTON 404-4 Hammer-On Vise Jaw Caps, Copper, For 4 in Vise Jaw Width, Pair
The WILTON Replacement Vise Jaw is a pair of hammer-on vise jaw caps made of copper, designed for use with a 4-inch vise jaw width. These caps are suitable for both permanent and temporary workholding applications…
SKU 3G-OTH-306935
Also listed as: 4044 · 404 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The WILTON Replacement Vise Jaw is a pair of hammer-on vise jaw caps made of copper, designed for use with a 4-inch vise jaw width. These caps are suitable for both permanent and temporary workholding applications. The product is manufactured by WILTON under part number 404-4.
Frequently Asked Questions
What is the WILTON Replacement Vise Jaw 404-4 used for?
The WILTON Replacement Vise Jaw 404-4 is a pair of hammer-on copper vise jaw caps for 4-inch vise jaw widths. It is used for permanent or temporary workholding applications where a non-marring, soft gripping surface is needed to protect delicate workpieces from damage during clamping.
What are the specifications of the WILTON 404-4 vise jaw?
The WILTON 404-4 is a pair of hammer-on vise jaw caps made of copper. It is designed for a 4-inch vise jaw width and is suitable for both permanent and temporary workholding. The manufacturer part number is 404-4, and the product is manufactured by WILTON.
Where to buy WILTON 404-4 vise jaws worldwide?
You can source the WILTON 404-4 copper vise jaw caps worldwide through 3G Electric. As a global industrial equipment distributor since 1990, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install WILTON hammer-on vise jaw caps?
To install WILTON hammer-on vise jaw caps, first ensure the vise jaws are clean and free of debris. Align the copper cap over the jaw and gently tap it into place using a hammer until it is fully seated. The caps are designed for a secure friction fit and can be removed by prying them off when needed.
Used in
Common applications for WILTONWILTON Products
3G Electric supplies WILTON hammer-on vise jaw caps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
