YORK S1-9951-1361 Burner Orifice
YORK Seals, Fittings & Fasteners for HVACR Equipment. Specifications: Product Type: Burner Orifice.
SKU 3G-OTH-76610
Also listed as: S199511361 · S1 9951 1361
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
YORK Seals, Fittings & Fasteners for HVACR Equipment. Specifications: Product Type: Burner Orifice.
Frequently Asked Questions
What is the YORK S1-9951-1361 burner orifice used for?
The YORK S1-9951-1361 burner orifice is a precision metering component used in HVACR gas-fired heating equipment. It controls the flow of gas to the burner for proper combustion. This part is commonly applied in commercial furnaces, rooftop units, and boilers where YORK burners are installed.
What are the specifications of the YORK S1-9951-1361 orifice?
The YORK S1-9951-1361 is a burner orifice with manufacturer part number S1-9951-1361. It is classified under seals, fittings, and fasteners for HVACR equipment. The orifice is designed for use in YORK gas-fired heating systems to regulate gas flow. No additional dimensions or pressure ratings are provided by the manufacturer.
Where to buy the YORK S1-9951-1361 orifice worldwide?
3G Electric supplies the YORK S1-9951-1361 burner orifice worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time. We source and deliver this part to support HVACR maintenance and repair operations globally.
How to install the YORK S1-9951-1361 burner orifice?
To install the YORK S1-9951-1361 orifice, first ensure the gas supply is off and the system is depressurized. Remove the old orifice using a wrench, apply thread sealant to the new part, and tighten to manufacturer torque specifications. Reconnect gas lines, check for leaks with soap solution, and verify burner flame characteristics.
Used in
Common applications for YORKYORK Products
3G Electric supplies YORK seals, fittings & fasteners for hvacr equipment. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- This piston T-seal is made of nitrile with a 70 Shore A hardness. It is designed for use in hydraulic and pneumatic cylinders with a 6 1/2 in bore diameter and a 0.368 in groove width. The seal operates in temperatures from -35° to 220°F and prevents fluid leakage between the piston and cylinder bore
- Piston T-seal designed for use in hydraulic or pneumatic cylinders to prevent fluid or gas leakage past the piston. Constructed from black Nitrile with a hardness of 70 Shore A. Suitable for a 0.282 in groove width
- This piston T-seal is designed for a 5 1/2 in bore diameter and a 0.368 in groove width. Made from black Nitrile with a hardness of 70 Shore A, it operates in a temperature range of -35° to 220°F. Suitable for use in hydraulic and pneumatic cylinders to prevent fluid leakage between piston and bore
- This piston T-seal is designed for use in hydraulic and pneumatic cylinders to prevent fluid leakage past the piston. It fits a 4-inch bore diameter and a 0.282-inch groove width. Made from black nitrile rubber with a hardness of 70 Shore A, it operates in a temperature range of -35° to 220°F. Suitable for industrial machinery requiring reliable sealing in linear motion applications
- This piston crown seal is designed for use in hydraulic and pneumatic cylinders to prevent fluid or gas leakage past the piston. It fits a 1 in bore diameter and a 0.185 in groove width. Made of urethane with a 95 Shore A durometer, it operates in temperatures from -35° to 220°F
- This piston T-seal is designed for use in hydraulic or pneumatic cylinders to seal the annular gap between piston and bore. It fits a 4 1/2 in bore diameter and a 0.282 in groove width. Made of black nitrile with a hardness of 70 Shore A, it operates from -35° to 220°F
