36711501 KIT No. 123 - Part No. 36711501: The Complete Buyer's Guide for Singapore Industry
Table of Contentsexpand_more
36711501 KIT No. 123 - Part No. 36711501 is a service kit identifier: the number tells you which OEM kit family the part belongs to, and the kit itself contains the specific components — filters, coolant, cables, seals or anti-siphon hardware — required to complete one scheduled maintenance or repair task on a defined piece of equipment. To buy the right one, match the kit number to the host equipment's make, model and series.
What is a service kit and why does the part number matter?
A service kit is a pre-packaged set of OEM-specified components — filters, fluids, cables, seals or fittings — assembled so that a single part number covers one complete maintenance or repair action. The part number is the contract: it guarantees the contents match the equipment the OEM designed them for.
In practice, that means a kit number like 36711501 KIT No. 123 is not interchangeable with a visually similar kit from another series. INGERSOLL RAND, for example, issues separate rotary screw service kits for different compressor generations, each with its own Ultra Coolant volume and filter set. Ordering the wrong generation kit is the single most common cause of premature filter failure in Singapore compressor rooms.
According to INGERSOLL RAND rotary screw compressor service documentation, scheduled maintenance kits should be installed at the OEM-recommended interval — typically measured in running hours — to preserve airend warranty coverage and compressor efficiency.
How do you identify the correct kit for your equipment?
Identification is a four-step process, and skipping any step risks a wrong-part return.
- Read the equipment nameplate. Record make, model, series and serial number. For compressors this is usually on the airend housing; for pumps it is on the casing.
- Match the kit number to the OEM parts list. Confirm that 36711501 KIT No. 123 (or the equivalent kit for your unit) is listed against your exact model and series.
- Check the kit contents against the task. A scheduled-service kit contains consumables; a repair kit contains wear parts. They are not the same purchase.
- Confirm the operating environment. In Singapore's humid tropical climate, specify corrosion-resistant cable and hardware where the kit is exposed to washdown or marine air.
Spec table: what to verify before ordering
The table below lists the attributes that determine whether a kit will fit and perform. Values shown are the categories you must confirm with the OEM data sheet for your specific unit — 3G Electric's technical team can verify them against your nameplate.
| Attribute | What to confirm | Typical unit / format |
|---|---|---|
| Kit part number | Exact OEM kit number (e.g. 36711501 KIT No. 123) | Numeric string |
| Host equipment make | OEM brand of the compressor, pump or switch | Brand name |
| Host equipment series | Generation or series code from the nameplate | Alphanumeric code |
| Service interval | Running hours between kit replacements | Hours (h) |
| Supply voltage (controls) | Control circuit voltage for switch kits | 24 VDC or 230 VAC |
| Supply voltage (mains) | Singapore mains supply | 230 V / 50 Hz single-phase; 400 V / 50 Hz three-phase |
| Ingress protection | IP rating required for the installation environment | IP65 or higher for washdown |
| Operating temperature | Ambient range at the installation point | °C |
| Kit contents | Filters, coolant, cables, seals, fittings included | Itemised list |
Types of kits and where they are used in Singapore
Service kits fall into four practical families, each with a distinct Singapore buyer profile.
- Compressor maintenance kits. Bundled coolant and filters for rotary screw compressors. Used in precision manufacturing, pharmaceutical plants and F&B facilities where compressed air contacts product or instruments. See INGERSOLL RAND Rotary Screw Ultra Coolant Service Kit (TAS Gen 3) and INGERSOLL RAND Rotary Screw Ultra Coolant Service Kit 47735402001.
- Anti-siphon kits. Prevent unwanted siphoning in fuel transfer systems. Common in marine bunkering, fleet depots and generator fuel farms. See FILL-RITE Anti-Siphon Kit KIT700AS for FR700 Series Pumps.
- Emergency stop cable kits. Replacement cables and end protectors for cable-pull E-stops on conveyors, packaging lines and machine guards. See TELEMECANIQUE SENSORS XY2CZ9350 Cable Kit for XY2C Series.
- Reset and access keys. Replacement keys for locked E-stop switches after activation. See SCHNEIDER ELECTRIC Replacement Key XY2C Key Code 455.
Selection criteria: how to choose the right kit
- Match the OEM part number exactly. A kit number is model- and series-specific. Never substitute a kit from a different generation, even if the contents look similar.
- Confirm the service interval. Scheduled kits are consumed on running hours; buying the wrong interval kit means either premature replacement or overdue service.
- Check the environment. Singapore's humidity and coastal marine air accelerate corrosion. Specify galvanised or stainless cable and IP65-or-better enclosures for outdoor or washdown areas.
- Verify electrical compatibility. Control circuits are commonly 24 VDC; mains-powered equipment runs on 230 V / 50 Hz single-phase or 400 V / 50 Hz three-phase in Singapore.
- Confirm compliance context. Safety-related kits (E-stop cables, keys) sit inside a WSH Act risk-management framework; keep the OEM documentation with the maintenance record.
- Buy from a supplier who can verify the match. A distributor who checks your nameplate against the kit number saves a return and a production stoppage.
Product comparison: kits across duty levels
The table below compares representative kits from 3G Electric's stock, arranged from light-duty safety hardware through to heavy-duty compressor service kits.
| Kit | Function | Host equipment | Typical duty | Key contents |
|---|---|---|---|---|
| SCHNEIDER ELECTRIC Replacement Key XY2C Key Code 455 | Reset / unlock after E-stop | XY2C series cable-pull switches | Light — safety access | Replacement key, code 455 |
| TELEMECANIQUE SENSORS XY2CZ9350 Cable Kit for XY2C Series | Cable replacement | XY2C series E-stop switches | Light–medium — safety | Cable plus three end protectors |
| TELEMECANIQUE SENSORS XY2CZ302 Galvanised Replacement Cable | Cable replacement | XY2C series E-stop switches | Medium — safety, humid areas | Galvanised cable |
| HONEYWELL CPS Series Replacement Cable CLSZC7 | Cable replacement | Honeywell CPS series E-stop switches | Medium — safety | Cable component |
| FILL-RITE Anti-Siphon Kit KIT700AS for FR700 Series Pumps | Anti-siphon protection | Fill-Rite FR700 series pumps (incl. FR710VB) | Medium — fuel transfer | Anti-siphon hardware, Teflon tape |
| INGERSOLL RAND Rotary Screw Ultra Coolant Service Kit (TAS Gen 3) | Scheduled compressor service | Ingersoll Rand rotary screw compressors | Heavy — production critical | Ultra Coolant, replacement filters |
| INGERSOLL RAND Rotary Screw Ultra Coolant Service Kit 47735402001 | Scheduled compressor service | Ingersoll Rand rotary screw compressors | Heavy — production critical | Ultra Coolant, replacement filters |
Step up the ladder when the cost of downtime exceeds the cost of the kit. Safety cables and keys are low-value items — buy spares. Compressor service kits protect the airend, the single most expensive component in the plant; buy the OEM kit and buy it before the interval is due. If your equipment is exposed to coastal marine air or washdown, choose galvanised or stainless variants such as the XY2CZ302 cable rather than standard cable.
Why source from 3G Electric in Singapore
3G Electric stocks 209+ products across air compressor parts kits, anti-siphon kits and cable-pull kits and replacement parts, with deep specialist expertise in combustion, pumps and controls. We are a distributor and supplier — not a catalogue-only reseller — which means we verify the kit number against your nameplate before it ships.
With 35+ years of experience serving Singapore's marine and offshore, precision manufacturing, F&B and pharmaceutical sectors, we understand the local constraints: humid tropical corrosion, 230 V / 50 Hz and 400 V / 50 Hz supplies, EMA licensing context for electrical work, and WSH compliance for machine safety. Local stock means fast delivery across Singapore, and our technical team supports sizing, cross-referencing and installation questions.
Frequently asked questions
How do I know if 36711501 KIT No. 123 - Part No. 36711501 fits my equipment?
Match the kit number to your equipment nameplate — make, model and series — against the OEM parts list. Kit numbers are series-specific, so a visually similar kit from another generation will not fit. Send your nameplate details to 3G Electric and we will verify the match before you order.
What is the difference between a service kit and a repair kit?
A service kit contains consumables — filters, coolant, cables — for scheduled maintenance at a defined running-hour interval. A repair kit contains wear parts for a specific failure. They are ordered separately and are not interchangeable, even when the part numbers look similar.
Where can I buy 36711501 KIT No. 123 - Part No. 36711501 in Singapore?
3G Electric supplies compatible service kits from INGERSOLL RAND, FILL-RITE, Honeywell and Schneider Electric from Singapore stock. Contact us with your equipment nameplate and required quantity for a quote in SGD and a confirmed lead time.
What is the typical delivery lead time in Singapore?
Items held in local stock are typically delivered within Singapore in a few working days. Non-stock or indent items carry a longer lead time confirmed at quotation. Because we verify the kit match before dispatch, you avoid the return cycle that comes from ordering the wrong generation kit.
Do I need to consider voltage when ordering a kit?
Only for kits that include electrical components. Singapore mains is 230 V / 50 Hz single-phase or 400 V / 50 Hz three-phase, and control circuits are commonly 24 VDC. Confirm the control voltage of your E-stop or switch circuit before ordering a kit that includes electrical parts.
How does Singapore's climate affect kit selection?
High humidity and coastal marine air accelerate corrosion on cables, hardware and enclosures. For outdoor, washdown or marine-adjacent installations, specify galvanised or stainless cable and IP65-or-better enclosures — for example the galvanised XY2CZ302 cable rather than a standard cable.
Key takeaways
- 36711501 KIT No. 123 - Part No. 36711501 is a service kit identifier — the number is model- and series-specific, not universal.
- Always verify the kit number against the equipment nameplate before ordering; wrong-generation kits are the most common cause of premature failure.
- Match the kit type to the task: scheduled service kits contain consumables, repair kits contain wear parts.
- For Singapore installations, specify corrosion-resistant cable and IP65-or-better enclosures in humid, coastal or washdown areas.
- 3G Electric stocks 209+ related products with 35+ years of experience and local Singapore delivery.
Next step
Contact 3G Electric for a quote on 36711501 KIT No. 123 - Part No. 36711501 or any compatible service kit. Send us your equipment nameplate — make, model, series and serial — and our technical team will confirm the correct kit, check stock, and provide a quote in SGD with a Singapore delivery lead time.
