Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
Home›Resources›Siemens BPZ.B180B1 Infrared Flame Detector: International Buyer's Guide 2026

Siemens BPZ.B180B1 Infrared Flame Detector: International Buyer's Guide 2026

A comprehensive buyer's guide to the Siemens BPZ.B180B1 Infrared Flame Detector for international markets. Learn how it works, key specifications, selection criteria, and sourcing options from 3G Electric.
Publication Date19 November 2026 · 09:29 pm
Technical Reviewer3G Electric Technical Team
Siemens BPZ.B180B1 Infrared Flame Detector: International Buyer's Guide 2026
Controls
Table of Contentsexpand_more

The Siemens BPZ.B180B1 Infrared Flame Detector is a flame-monitoring accessory for Siemens combustion control systems, designed to detect the presence of a burner flame using infrared sensing technology. It is used in industrial burner applications where reliable flame supervision is critical for safety and operational efficiency.

What is a Siemens BPZ.B180B1 Infrared Flame Detector?

A Siemens BPZ.B180B1 Infrared Flame Detector is a flame sensor that uses infrared (IR) technology to detect the presence of a flame in a combustion system. It is part of Siemens' range of burner controls and accessories, ensuring safe and reliable burner operation.

This detector is typically used with Siemens burner control units, such as the LME series, to monitor flame presence and initiate safety shutdowns if the flame is lost. The BPZ.B180B1 is designed for industrial environments where robust flame detection is required.

How does an infrared flame detector work?

Infrared flame detectors work by sensing the infrared radiation emitted by a flame. The BPZ.B180B1 uses a photodiode or similar sensor to detect the characteristic flicker frequency of a flame, distinguishing it from background IR sources.

When the detector senses a flame, it sends a signal to the burner control unit, which then allows the burner to continue operating. If the flame is lost, the control unit shuts off the fuel supply to prevent a hazardous situation.

Key specifications and compatibility

The Siemens BPZ.B180B1 is designed for use with specific Siemens burner controls. Below is a summary of typical specifications. Always refer to the official Siemens datasheet for exact values.

ParameterValue
Product typeInfrared flame detector
BrandSiemens
CompatibilitySiemens burner controls (e.g., LME series)
Supply voltageTypically 24 VDC (verify with datasheet)
Operating temperatureRefer to datasheet
ConnectionPlug-in or wired, depending on model

Note: Specifications are indicative and may vary. Always consult the official Siemens documentation for your specific application.

Types and applications in International markets

Infrared flame detectors like the BPZ.B180B1 are used in a variety of industrial combustion applications, including:

  • Industrial boilers and furnaces
  • Process heaters in chemical and petrochemical plants
  • Commercial and industrial burners for oil and gas
  • Waste incineration systems

In International markets, voltage and frequency standards vary. The BPZ.B180B1 is typically powered by 24 VDC, which is derived from the burner control system. Ensure that the control system is compatible with local power supply (e.g., 230 VAC 50 Hz or 60 Hz).

Selection criteria for infrared flame detectors

  1. Compatibility: Ensure the detector is compatible with your existing Siemens burner control model.
  2. Flame type: Consider the fuel type (gas, oil, or dual fuel) and flame characteristics.
  3. Environmental conditions: Check temperature, humidity, and exposure to contaminants.
  4. Certifications: Verify that the detector meets local safety standards (e.g., CE, UL, CSA) for your region.
  5. Mounting and connection: Confirm the mounting style and electrical connection match your installation.

Product selection ladder

While the BPZ.B180B1 is a specific model, Siemens offers a range of flame detectors and related accessories. Below is a comparison of related products from our catalogue to help you choose.

ModelDescriptionTypical application
Siemens LOGO! SoftwareSoftware for programming LOGO! logic modulesSmall-scale automation, lighting, HVAC, conveyor controls

Note: The BPZ.B180B1 is not listed in our current catalogue, but we can source it. The LOGO! Software is shown as an example of Siemens accessories we supply. For flame detectors, contact us for a quote.

When stepping up from basic flame detection, consider advanced detectors with higher sensitivity or additional features. The BPZ.B180B1 is a standard IR detector; for critical applications, you may need UV/IR or self-checking models.

Why source from 3G Electric?

3G Electric has over 35 years of experience supplying industrial equipment and parts across 14 departments. We interpret your requirements and provide quotes for parts beyond our catalogue, including the Siemens BPZ.B180B1. Goods are offered EXW Singapore, and we can assist with technical documentation. We are not a distributor or dealer for any brand; we supply genuine parts sourced from our overseas warehouse.

Frequently asked questions

What is the Siemens BPZ.B180B1 used for?

The Siemens BPZ.B180B1 is an infrared flame detector used to monitor flame presence in industrial burners. It sends a signal to the burner control to ensure safe operation and shutdown if flame is lost.

Is the BPZ.B180B1 compatible with all Siemens burner controls?

No, compatibility depends on the specific control model. Always check the Siemens datasheet or contact us for assistance. It is typically used with LME series controls.

What is the supply voltage for the BPZ.B180B1?

The BPZ.B180B1 typically operates on 24 VDC, supplied by the burner control unit. Verify with the datasheet for your specific application.

Can I use the BPZ.B180B1 in International markets with 50 Hz power?

Yes, the detector itself is DC-powered, so it is independent of AC frequency. However, ensure the burner control system is compatible with local power (50 Hz or 60 Hz).

Where can I buy the Siemens BPZ.B180B1 in International?

3G Electric supplies the BPZ.B180B1 and other Siemens parts. Contact us for a quote. Goods are EXW Singapore.

What is the difference between IR and UV flame detectors?

IR detectors sense infrared radiation and are less sensitive to UV sources, while UV detectors respond to ultraviolet radiation. IR is often used for oil flames, UV for gas flames. Selection depends on fuel and environment.

Key takeaways

  • The Siemens BPZ.B180B1 is an infrared flame detector for industrial burner safety.
  • Compatibility with your Siemens burner control is critical.
  • 3G Electric can source this part and provide technical support.
  • Goods are offered EXW Singapore; plan your logistics accordingly.
  • Always verify specifications with official Siemens documentation.

Contact 3G Electric for a quote on the Siemens BPZ.B180B1 Infrared Flame Detector or any other industrial part. We interpret your requirements and supply genuine equipment.

Frequently Asked Questions
What is the Siemens BPZ.B180B1 used for?+
The Siemens BPZ.B180B1 is an infrared flame detector used to monitor flame presence in industrial burners. It sends a signal to the burner control to ensure safe operation and shutdown if flame is lost.
Is the BPZ.B180B1 compatible with all Siemens burner controls?+
No, compatibility depends on the specific control model. Always check the Siemens datasheet or contact us for assistance. It is typically used with LME series controls.
What is the supply voltage for the BPZ.B180B1?+
The BPZ.B180B1 typically operates on 24 VDC, supplied by the burner control unit. Verify with the datasheet for your specific application.
Can I use the BPZ.B180B1 in International markets with 50 Hz power?+
Yes, the detector itself is DC-powered, so it is independent of AC frequency. However, ensure the burner control system is compatible with local power (50 Hz or 60 Hz).
Where can I buy the Siemens BPZ.B180B1 in International?+
3G Electric supplies the BPZ.B180B1 and other Siemens parts. Contact us for a quote. Goods are EXW Singapore.
What is the difference between IR and UV flame detectors?+
IR detectors sense infrared radiation and are less sensitive to UV sources, while UV detectors respond to ultraviolet radiation. IR is often used for oil flames, UV for gas flames. Selection depends on fuel and environment.
Recommended Hardware
Software for programming and configuring LOGO! logic modules. Used in small-scale automation systems for tasks such as lighting, HVAC, and conveyor controls. Supports creation, simulation, and modification of control logic.
Siemens
Software for programming and configuring LOGO! logic modules. Used in small-scale automation systems for tasks such as lighting, HVAC, and conveyor controls. Supports creation, simulation, and modification of control logic.
View Specifications
support_agent
Need Technical Assistance?
Our engineers are available for specialized consultations regarding complex equipment assemblies.
Contact Support