directions_boat

Marine & Offshore

Browse Marine & Offshore pumps and spares from 12+ brands at 3G Electric. Source genuine parts worldwide — in stock, ready to ship.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 1571 of 2581

This high-temperature sink drain pump system is designed for draining wastewater from sinks, laundry trays, or other fixtures where gravity drainage is not feasible. It features a 1/2 hp motor, 115V AC rated voltage, and delivers 46 gpm at 10 feet of head. The pump includes a piggyback tether float switch and a top discharge with NPT connections.

LIBERTY PUMPS

LIBERTY PUMPS High-Temp Sink Drain Pump System

BrandLIBERTY PUMPS

Sign inAvailable

Dial pressure gauge with a 4-inch dial, 304 stainless steel case, and glycerin fill for vibration dampening. Features a 316 stainless steel female-threaded Mini-Seal with mineral oil fill. Accuracy ±1.00%. Wetted parts are stainless steel. Suitable for measuring pressure in hydraulic, pneumatic, and process fluid systems.

KODIAK CONTROLS

KODIAK CONTROLS KC301L4030/DSM3511LP Dial Pressure Gauge with

BrandKODIAK CONTROLS

Sign inAvailable

Stainless steel body rotary vane pump head with 3/8" NPT ports, balanced relief valve, and carbon vanes. Maximum flow 60 gph, shaft size 1/2 in. NSF 169 listed. Strainer not included. Used in beverage carbonation and dispensing systems.

PROCON

PROCON 113A060F31CA 250 Carbonator Mount Rotary Vane Pump Head

BrandPROCON

Sign inAvailable

Plastic impeller for circulator pumps, 5.25-inch diameter, includes seal kit. Used in hydronic heating and cooling systems to circulate water or other fluids.

ARMSTRONG

ARMSTRONG Impeller for Circulator Pumps

BrandARMSTRONG

Sign inAvailable

Zinc die-cast compressed air regulator with 3/8 in NPT connection, 20 cfm flow capacity, and adjustable pressure range of 0 psi to 50 psi via knob. Used to control and stabilize downstream air pressure in pneumatic systems.

JOHNSON CONTROLS

JOHNSON CONTROLS R-130-15 Compressed Air Regulator

BrandJOHNSON CONTROLS

Sign inAvailable

LINCOLN

LINCOLN 1418 Grease Dispensing Piston Drum Pump, 50:1 Ratio, Pump Only

BrandLINCOLN

Sign inAvailable

REOTEMP

REOTEMP Pressure Gauge: 0 psi to 30 psi, 2 1/2 in Dial, 1 1/2 in Tri-Clamp, Bottom

BrandREOTEMP

Sign inAvailable

Disposable calibration gas cylinder containing 1.1% propane in nitrogen, with ±5% accuracy. Designed for use with all OEM portable gas detectors. Used to verify sensor response and maintain measurement accuracy in industrial safety applications.

GASCO

GASCO Calibration Gas: Propane 1.1% in Nitrogen

BrandGASCO

Sign inAvailable

This motor-driven diaphragm metering pump operates on 115V AC with a 1/60 hp motor. It features a PVC head and a CSPE diaphragm, with wetted materials including CSPE, PTFE, and Viton. Suitable for precise chemical injection in water treatment and industrial processing applications.

CHEM-TECH

CHEM-TECH X003-XA-AAAAG19 Standard Duty Motor-Driven Diaphragm Metering Pump

BrandCHEM-TECH

Sign inAvailable

This compact solenoid-driven diaphragm metering pump is designed for precise chemical dosing in water treatment, industrial processing, and chemical injection applications. It features a polypropylene head, PTFE diaphragm and seals, PVDF fittings, and ceramic check balls. With a reproducibility of ±1.0% and a maximum flow rate of 108 gpd, it operates on 115V AC.

LMI PUMPS

LMI PUMPS B131-465NI Compact Solenoid-Driven Diaphragm Metering Pump

BrandLMI PUMPS

Sign inAvailable

← Prev 1…1569 1570 1571 1572 1573…2581 Next →

Top brands in Marine & Offshore

Manufacturers serving this application.