directions_boat

Marine & Offshore

Browse Marine & Offshore pumps and spares from 12+ brands at 3G Electric. Source genuine parts worldwide — in stock, ready to ship.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2202 of 2581

This main burner is a replacement component for gas-fired furnaces and air handlers. It is used to support proper gas combustion and heat transfer in HVAC systems.

YORK

YORK S1-029-20482-000 Main Burner

BrandYORK

Sign inAvailable

Disposable calibration gas cylinder containing 2.2% propane in nitrogen background gas, with ±5% accuracy. Used for verifying and adjusting the response of portable gas detectors to combustible gases in industrial safety applications. Compatible with all OEM gas detectors.

GASCO

GASCO Calibration Gas: Propane 2.2% in Nitrogen, Disposable Cylinder

BrandGASCO

Sign inAvailable

ARGOS TECHNOLOGIES

ARGOS TECHNOLOGIES Rubber Adapter for EV514

BrandARGOS TECHNOLOGIES

Sign inAvailable

This limit control is a replacement component for HVACR systems, used to monitor and limit temperature or pressure. It interrupts operation when set thresholds are exceeded, helping to prevent equipment damage. Suitable for commercial heating, ventilation, air conditioning, and refrigeration applications.

INTERNATIONAL ENVIRONMENTAL

INTERNATIONAL ENVIRONMENTAL 70006013 Limit Control

BrandINTERNATIONAL ENVIRONMENTAL

Sign inAvailable

Pneumatic temperature transmitter for HVACR systems. Converts temperature changes into a proportional pneumatic signal for controlling dampers, valves, and actuators in commercial building automation. Used as a replacement part in building control systems.

SCHNEIDER

SCHNEIDER 2252-610 Pneumatic Temperature Transmitter

BrandSCHNEIDER

Sign inAvailable

Disposable calibration gas cylinder containing 25 ppm Hydrogen Sulfide in Nitrogen, with +/-5% accuracy. Used to verify and adjust the response of portable gas detectors from all OEM manufacturers. Background gas is Nitrogen.

GASCO

GASCO X05NI80CA341FW8 Disposable Calibration Gas

BrandGASCO

Sign inAvailable

Replacement pump shaft assembly for circulator pumps. Includes pump shaft assembly. Compatible with PD series and manufacturer model number PR AB. Used in commercial and industrial HVAC systems to restore pump operation.

BELL

BELL 189035LF Replacement Pump Shaft Assembly

BrandBELL

Sign inAvailable

Horizontal booster pump for increasing water pressure in commercial and industrial water supply systems, irrigation networks, and HVAC applications. Delivers 36 gpm at best efficiency flow and 121 psi shut-off pressure. Single-phase 230V AC motor.

Dayton

Dayton Horizontal Booster Pump, 3 hp, Single Phase, 230V AC

BrandDayton

Sign inAvailable

This testing kit for portable gas detectors includes a fitting and tube assembly with a maximum flow rate of 0.25 lpm. The kit does not include calibration gas, allowing selection of the appropriate gas mixture for specific detector requirements. Used for routine testing and calibration of portable gas detection instruments.

MSA

MSA Calibration Kit: Fitting/Tube Assembly

BrandMSA

Sign inAvailable

Disposable calibration gas mixture containing 1,000 ppm propane in air, with ±5% accuracy. Used for field calibration of portable gas detectors to verify sensor response to combustible gases. Compatible with all OEM gas detectors.

GASCO

GASCO Calibration Gas: Propane 1,000 ppm in Air, Disposable, ±5% Accuracy

BrandGASCO

Sign inAvailable

← Prev 1…2200 2201 2202 2203 2204…2581 Next →

Top brands in Marine & Offshore

Manufacturers serving this application.