directions_boat

Marine & Offshore

Browse Marine & Offshore pumps and spares from 12+ brands at 3G Electric. Source genuine parts worldwide — in stock, ready to ship.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2363 of 2581

Single-phase sewage ejector pump with 2/5 hp motor, 115V AC rated voltage, and vertical discharge orientation. Features a thermoplastic elastomer impeller and integral vertical float switch, handling solids up to 2 inches in diameter. Suitable for pumping wastewater and sewage in residential and commercial basement systems and effluent transfer applications.

LITTLE GIANT

LITTLE GIANT 509411 General Purpose Sewage Ejector Pump

BrandLITTLE GIANT

Sign inAvailable

YORK

YORK S1-026-34028-005 Limit Control

BrandYORK

Sign inAvailable

Limit control for HVACR systems, used to monitor and limit temperature or pressure. Interrupts the circuit when conditions exceed set thresholds to prevent equipment damage. Suitable for replacement in commercial and industrial heating, ventilation, and air conditioning units.

YORK

YORK S1-7660-3591 Limit Control

BrandYORK

Sign inAvailable

This vibration absorber reduces mechanical vibration and noise in HVACR pump and tubing systems. It protects connected equipment from vibration-induced wear, extending service life in commercial and industrial applications.

LIEBERT

LIEBERT Vibration Absorber, 123575P4

BrandLIEBERT

Sign inAvailable

Disposable calibration gas cylinder containing Refrigerant R-22 at 800 ppm in an air background, with +/-5% accuracy. Designed for use with all OEM portable gas detectors to verify and adjust sensor accuracy in refrigerant leak detection and monitoring applications. Fitted with a CGA 600 connection.

GASCO

GASCO Disposable Calibration Gas: Refrigerant R-22 800 ppm in Air, CGA 600

BrandGASCO

Sign inAvailable

This control phase monitor protects three-phase equipment by detecting phase loss, reversal, and imbalance. It is used in HVACR and industrial systems to prevent compressor and motor damage. Suitable for commercial refrigeration, air conditioning, and pump applications.

Copeland

Copeland 085-0160-00 Control Phase Monitor

BrandCopeland

Sign inAvailable

Stainless steel probe for detecting and controlling liquid levels in boilers, tanks, and vessels. Provides on/off switching for pump control, low-water cutoff, and alarm systems in HVACR and process applications.

MCDONNELL

MCDONNELL G-2-SS Liquid Level Control Probe

BrandMCDONNELL

Sign inAvailable

Interconnect cable for level controls with Tri-Clamp fitting, 10 ft length, and 2 conductors. Used to connect sensors or probes to control units in liquid-level monitoring systems, suitable for sanitary process applications.

LUMENITE

LUMENITE 2J-1-1/2 Connector Level Control Cable, Tri-Clamp, 10 ft, 2 Conductors

BrandLUMENITE

Sign inAvailable

Portable multi-gas detector with integrated sampling pump, Lithium Ion battery, and Bluetooth connectivity. Detects Hydrogen Cyanide. Yellow enclosure rated IP66/IP68. Suitable for confined space entry and industrial safety monitoring.

HONEYWELL

HONEYWELL BW Ultra Multi-Gas Detector with Sampling Pump, HU-X1W1H1M1A1-Y-N

BrandHONEYWELL

Sign inAvailable

The VPP-0111 Motorized Sample Draw Pump is a Ventis Pro Series accessory for the Ventis Pro5 portable gas detector. It draws air from remote or confined spaces to the detector, enabling continuous gas monitoring where direct sensor exposure is not possible.

INDUSTRIAL SCIENTIFIC

INDUSTRIAL SCIENTIFIC VPP-0111 Motorized Sample Draw Pump for Ventis Pro5

BrandINDUSTRIAL SCIENTIFIC

Sign inAvailable

← Prev 1…2361 2362 2363 2364 2365…2581 Next →

Top brands in Marine & Offshore

Manufacturers serving this application.