directions_boat

Marine & Offshore

Browse Marine & Offshore pumps and spares from 12+ brands at 3G Electric. Source genuine parts worldwide — in stock, ready to ship.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2382 of 2581

This heavy-duty motor-driven diaphragm metering pump features a PVDF head, PTFE diaphragm and seals, and ceramic check balls. It operates on 115/230V AC with a 1/2 hp motor and provides ±2.0% reproducibility. Suitable for precise chemical dosing in industrial water treatment and chemical processing applications.

GREENLINE

GREENLINE DM2AVFC Heavy-Duty Motor-Driven Diaphragm Metering Pump

BrandGREENLINE

Sign inAvailable

Multi-gas detector for monitoring Lower Explosive Limit (LEL) gases. Features a Lithium Ion battery, LCD display, black housing, and Peer to Peer communication protocol. Suitable for use in industrial environments where flammable gas detection is required.

INDUSTRIAL SCIENTIFIC

INDUSTRIAL SCIENTIFIC Ventis Pro5 Multi-Gas Detector

BrandINDUSTRIAL SCIENTIFIC

Sign inAvailable

34 L cylinder of calibration gas with air background and 5,000 ppm Refrigerant R-32 mixture. Used for verifying the accuracy of fixed gas detectors in HVAC and refrigeration applications.

MACURCO

MACURCO R-32 Gas 5000PPM Calibration Gas

BrandMACURCO

Sign inAvailable

Flame rod for use in industrial burners and heating systems. Senses electrical conductivity through the flame to confirm ignition and prevent unburned fuel accumulation. Replacement part for HVACR controls, switches, and thermostats.

AUBURN MANUFACTURING

AUBURN MANUFACTURING Flame Rod FRS-9

BrandAUBURN MANUFACTURING

Sign inAvailable

This multi-purpose pump control panel is designed for duplex pump systems, operating at 208/240/480V AC with a current range of 9 to 14 A. It is non-reversing and includes three tether float switches for level sensing. The panel features an audio alert output and a demand dose dosing schedule, suitable for automatic alternation in wastewater, sump, and effluent pumping stations.

Dayton

Dayton Multi-Purpose Pump Control Panel

BrandDayton

Sign inAvailable

This 6-gallon sink drain pump system is designed for removing wastewater from sinks, basins, or low-lying drains where gravity drainage is not possible. It features a 1/2 hp motor, 115V AC, 4.9 A, and delivers 51 gpm flow rate at 10 feet of head. The piggyback vertical switch enables automatic operation. Suitable for transferring water to a higher drain or sewer line in commercial or industrial settings.

Dayton

Dayton General Purpose Sink Drain Pump System, 6 gal

BrandDayton

Sign inAvailable

Dayton

Dayton Turbine Centrifugal Pump

BrandDayton

Sign inAvailable

Intermittent pilot ignition control for gas-fired heating systems. Operates at 24V AC control voltage with a 6-minute pre-purge, 1.5 A main valve output, and 0.7 mA flame sensor output. Designed as a replacement for other OEM brands.

Robertshaw

Robertshaw 712-017 Intermittent Pilot Ignition Control, 24V AC, 6 min Pre-Purge

BrandRobertshaw

Sign inAvailable

GASCO

GASCO Calibration Gas: Methane 5% in Nitrogen, 105 L Cylinder

BrandGASCO

Sign inAvailable

Engine-driven water pump with a 6 hp recoil-start engine and polypropylene volute. Features 3-inch FNPT inlet and outlet ports, delivering 190 gpm at 20 ft of head. Suitable for dewatering, irrigation, and general fluid transfer in agricultural, industrial, and construction settings.

BANJO

BANJO 300P6PRO Engine-Driven Water Pump, 6 hp, 3 in FNPT, 190 gpm @ 20 ft Head

BrandBANJO

Sign inAvailable

← Prev 1…2380 2381 2382 2383 2384…2581 Next →

Top brands in Marine & Offshore

Manufacturers serving this application.