directions_boat

Marine & Offshore

Browse Marine & Offshore pumps and spares from 12+ brands at 3G Electric. Source genuine parts worldwide — in stock, ready to ship.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 835 of 2581

Disposable calibration gas cylinder containing methane at 20% LEL (9750 ppm) in air, with ±5% accuracy. Used for verifying and calibrating portable gas detectors in industrial safety applications. Compatible with all OEM gas detectors.

GASCO

GASCO Calibration Gas: Methane 20% LEL in Air

BrandGASCO

Sign inAvailable

Ignition control board for managing ignition sequence and flame monitoring in HVAC systems. Used as a direct replacement part in compatible residential and light commercial heating equipment.

LENNOX

LENNOX Ignition Control Board, 81W03

BrandLENNOX

Sign inAvailable

Polycarbonate roller assembly for peristaltic pump heads. Used as a service and repair component in fluid handling systems for chemical dosing and metering applications.

STENNER

STENNER UC3ASYD Roller Assembly, Polycarbonate

BrandSTENNER

Sign inAvailable

Progressive cavity metering pump with 3/4 hp motor, 120 V AC single-phase power, stainless steel housing and rotor, and 1 in MNPT connection. Designed for precise, low-pulsation flow of viscous, shear-sensitive, or solids-laden fluids in industrial metering and transfer applications.

SEEPEX

SEEPEX Progressive Cavity Metering Pump, 3/4 hp, 120 V AC 1ph, Stainless Steel

BrandSEEPEX

Sign inAvailable

This air-operated pump system is designed for stationary tank applications, transferring low-viscosity fluids such as diesel exhaust fluid or coolant. It features a 1:1 pressure ratio and delivers a maximum flow rate of 8 gpm, handling fluids with a maximum viscosity of 1 cps. Suitable for industrial and automotive service environments where reliable fluid dispensing is required.

LIQUIDYNAMICS INC.

LIQUIDYNAMICS INC. LIQUIDYNAMICS INC

BrandLIQUIDYNAMICS INC.

Sign inAvailable

Disposable calibration gas mixture containing 5 ppm carbon monoxide in air, with +/-5% accuracy. Fitted with a CGA 165 connection for use with portable gas detectors from all OEMs. Used to verify and adjust the accuracy of gas detection instruments.

GASCO

GASCO 221L-389S Disposable Calibration Gas

BrandGASCO

Sign inAvailable

Disposable calibration gas mixture containing hexane at 45% LEL (0.495%) in air, with ±5% accuracy. Designed for use with all OEM portable gas detectors to verify sensor response for hexane detection in industrial safety applications.

GASCO

GASCO 103L-262-0.495 Hexane Calibration Gas (45% LEL, 0.495%)

BrandGASCO

Sign inAvailable

This liquid-operated jet eductor pump is constructed of brass with a 1/2 in MNPT connection and a 0.2 sizing factor. It moves fluids without moving parts, suitable for pumping, mixing, or agitating in sumps, tanks, and process lines.

Dayton

Dayton Liquid-Operated Jet Eductor Pump, 1/2 in MNPT, Brass, 0.2 Sizing Factor

BrandDayton

Sign inAvailable

This non-clog sewage ejector pump features a cast-iron housing and ductile iron impeller, handling solids up to 3 inches in diameter. It operates on three-phase 460V AC power with a 3 hp motor and horizontal discharge orientation. Suitable for wastewater applications requiring reliable solids handling in commercial or industrial settings.

FRANKLIN ELECTRIC

FRANKLIN ELECTRIC Non-Clog Sewage Ejector Pump

BrandFRANKLIN ELECTRIC

Sign inAvailable

Steel impeller for circulator pumps, 4.25-inch diameter. Compatible with manufacturer model number 102206. Used in hydronic heating and water circulation systems to restore pump flow and pressure.

BELL

BELL Impeller 118830, Steel, 4.25 in Dia, for Model 102206

BrandBELL

Sign inAvailable

← Prev 1…833 834 835 836 837…2581 Next →

Top brands in Marine & Offshore

Manufacturers serving this application.