Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

directions_boat

Marine & Offshore

Browse Marine & Offshore pumps and spares from 12+ brands at 3G Electric. Source genuine parts worldwide — in stock, ready to ship.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 945 of 2581

Dial pressure gauge with 316 stainless steel female-threaded mini-seal for measuring pressure in corrosive or viscous fluid systems. Features a 2 1/2 in dial, ±1.60% accuracy, 304 stainless steel case, glycerin gauge case liquid, and mineral oil seal fill. Wetted parts are stainless steel; seal lower housing is 316 stainless steel. Range: 0 psi to 60 psi.

KODIAK KC301L2560/DSM3511 Dial Pressure Gauge with 316 SS

BrandKODIAK

Sign inAvailable

This steel suction tube is designed for use with drum pumps to transfer fluids from drums or barrels. The 43 1/2-inch length allows access to standard containers. Suitable for industrial fluid handling and maintenance applications.

Dayton Steel Drum Pump Suction Tube, 43 1/2 in

BrandDayton

Sign inAvailable

Calibration gas cylinder with a 105 L capacity containing 1.4% hydrogen (35% LEL) in a background of air. Accuracy is ±2%. Used for verifying and adjusting the response of portable gas detectors in industrial safety applications.

GASCO 105ES-85-1.4 Calibration Gas Cylinder, Hydrogen 1.4% in Air, 105 L

BrandGASCO

Sign inAvailable

Magnetic-drive straight centrifugal pump with PVDF construction and Viton gasket. Powered by a 1/2 hp single-phase motor, rated for 115/208-230V AC. Suitable for transferring corrosive or high-purity fluids in applications requiring leak-free operation.

FINISH THOMPSON

FINISH THOMPSON DB6V-T-M226 Magnetic-Drive Straight Centrifugal Pump

BrandFINISH THOMPSON

Sign inAvailable

This calibration gas contains 0.5% methane (CH4) in nitrogen background gas, with ±2% accuracy. Supplied in a 105 L cylinder, it is used to verify and adjust the accuracy of portable gas detectors in industrial safety applications, ensuring correct response to combustible gas hazards.

GASCO 0.5% Methane Calibration Gas, 105 L Cylinder, ±2% Accuracy

BrandGASCO

Sign inAvailable

This rubber gasket is a replacement part for dewatering and wastewater pumps. It provides a seal between pump components to prevent fluid leakage in water and wastewater handling systems.

Dayton Gasket for Dewatering & Wastewater Pumps, Rubber, 090COLU1310

BrandDayton

Sign inAvailable

Digital flowmeter for fuel transfer pump systems. Features a 1-inch flange connection, maximum flow rate of 50 gpm, and accuracy of +/-1% when used with a computer. Stainless steel housing, measures in gallons.

FLOMEC G2S10FQ9GMD Digital Flowmeter, 1 in Flange, 50 gpm, Stainless Steel

BrandFLOMEC

Sign inAvailable

Universal intermittent pilot ignition control for gas-fired heating systems. Operates at 24V AC with 15-second lockout and 30-second pre-purge. Replaces other OEM brands.

RESIDEO S8610U3009 Intermittent Pilot Ignition Control, 24V AC

BrandRESIDEO

Sign inAvailable

Gas detection tube for measuring methyl iodide (CH3I) concentrations. Designed for use with NEXTTEQ NX-1000 pumps. Detection range: 500 to 15,000 ppm. Supplied as a 10-pack of single-use tubes.

NEXTTEQ NX185VH Methyl Iodide Gas Detection Tube, 10-Pack for NX-1000 Pumps

BrandNEXTTEQ

Sign inAvailable

Disposable calibration gas mixture containing 12% carbon dioxide with nitrogen balance, ±5% accuracy. Used for field calibration of portable gas detectors in industrial safety applications such as confined space entry and area monitoring.

GASCO Disposable Calibration Gas

BrandGASCO

Sign inAvailable

← Prev 1…943 944 945 946 947…2581 Next →

Top brands in Marine & Offshore

Manufacturers serving this application.