oil_barrel

Oil, Gas & Petrochemical

Browse 8,646 oil, gas & petrochemical supplies worldwide. Source solenoid valves, gas detectors & more from 12 leading brands at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 402 of 865

Disposable calibration gas mixture containing 8,000 ppm hydrogen in a nitrogen background, with +/-5% accuracy. Used for verifying and calibrating portable gas detectors in industrial safety applications.

GASCO

GASCO 103L-86N-8000 Disposable Calibration Gas (8,000 ppm Hydrogen in Nitrogen)

BrandGASCO

Sign inAvailable

NUMATICS

NUMATICS Mark 7 Solenoid Coil, 24V DC, Molded Wires, 225-272

BrandNUMATICS

Sign inAvailable

Single-ended cordset with DIN Form A female right-angle connector to bare wire, 3-meter PUR cable in gray, 3 pins, 18 AWG, IP67 rated. Used for connecting solenoid valves, sensors, and actuators in industrial automation systems requiring reliable signal or power transmission in harsh environments.

MURRELEKTRONIK

MURRELEKTRONIK DIN Form A Solenoid Connector Single-Ended Cordset

BrandMURRELEKTRONIK

Sign inAvailable

Two-way, normally closed solenoid cartridge valve with steel body and nitrile seals. Designed for C-8-2 cavity size. Used in hydraulic systems for on/off flow control, load holding, and pilot control applications.

CHAR-LYNN

CHAR-LYNN SBV11-8-C Solenoid Cartridge Valve

BrandCHAR-LYNN

Sign inAvailable

Disposable calibration gas mixture containing 2 ppm ethylene oxide (ETO) in nitrogen background, with ±5% accuracy. Designed for use with all OEM portable gas detectors to verify sensor performance in environments where ethylene oxide exposure monitoring is required.

GASCO

GASCO Disposable Calibration Gas - Ethylene Oxide 2 ppm in Nitrogen

BrandGASCO

Sign inAvailable

DRAEGER

DRAEGER Detector Chip for CMS Analyzer, Phosphine (PH3), 0.1 to 2.5 ppm

BrandDRAEGER

Sign inAvailable

Portable multi-gas detector with integrated sampling pump for continuous monitoring of carbon monoxide (CO), hydrogen sulfide (H2S), and oxygen (O2) levels. Powered by a lithium battery and featuring a PC-compatible interface for data download. Housed in a yellow enclosure. Suitable for use in industrial environments such as refineries, chemical plants, and confined spaces.

HONEYWELL

HONEYWELL BW Max XT Multi-Gas Detector with Sampling Pump

BrandHONEYWELL

Sign inAvailable

Single-ended cordset with a female right-angle DIN Form C connector and bare wire termination. Cable is 5 m long, yellow PVC jacket, 18 AWG wire. Rated IP67 for protection against dust and moisture. Used for connecting solenoid valves, sensors, and actuators in industrial automation.

MURRELEKTRONIK

MURRELEKTRONIK DIN Form C Solenoid Connector Single-Ended Cordset

BrandMURRELEKTRONIK

Sign inAvailable

This cordset connects a DIN Form A solenoid valve or sensor to an M12-enabled controller or I/O module. It features a 1-meter gray PUR cable with 18 AWG wire, 3 pins, and an IP67 rating for protection against dust and water immersion.

MURRELEKTRONIK

MURRELEKTRONIK DIN Form A Solenoid Connector x M12 Cordset

BrandMURRELEKTRONIK

Sign inAvailable

Disposable calibration gas cylinder containing Ethanol 380 ppm in a background of air (C2H6O/N2/O2) with +/-5% accuracy. Designed for use with all OEM gas detectors to verify sensor response in industrial safety applications.

GASCO

GASCO Calibration Gas: Ethanol 380 ppm in Air

BrandGASCO

Sign inAvailable

← Prev 1…400 401 402 403 404…865 Next →

Top brands in Oil, Gas & Petrochemical

Manufacturers serving this application.