AMANA

Amana PTACs with heat pump and electric heat are available in several cooling capacities, including 7,100 BtuH, 9,000 BtuH, 12,000 BtuH, and 14,600 BtuH. These capacities correspond to different room size ranges: 7,100 BtuH for 237–284 sq ft, 9,000 BtuH for 300–360 sq ft, 12,000 BtuH for 400–480 sq ft, and 14,600 BtuH for 487–584 sq ft. All models operate on 208/230V AC and are designed for through-wall installation. The heat pump provides primary heating, with electric heat as a secondary source. Plug types vary by model, including 6-15P, 6-20P, and 6-30P, to accommodate different electrical configurations.

The Amana PHWT-A150H is a non-programmable thermostat designed for basic temperature control in residential or light-commercial HVAC systems. It provides manual set-point adjustment without scheduling capabilities. The thermostat measures 5 5/16 inches by 5 5/16 inches by 3 inches. It is suitable for use with Amana PTACs and other HVAC equipment where simple, reliable temperature regulation is required. The non-programmable design means users set the desired temperature manually, and the thermostat maintains it without automated setbacks or schedules. This model is typically used in applications where consistent, straightforward operation is preferred over programmable features.

The Amana SGK01B is a metal grille designed to cover air intake or exhaust openings in HVAC and ventilation systems. It provides a finished appearance while allowing airflow, and is constructed from metal for durability. The grille is suitable for residential or light-commercial applications, often used in conjunction with PTAC units or other air distribution equipment. Its primary function is to protect the opening and distribute air evenly while maintaining an aesthetically acceptable front. The SGK01B is identified by its manufacturer part number and is available through 3G Electric as a standalone accessory or as part of a larger HVAC procurement.

Amana PTACs with heat pump and electric heat are available with different plug types to match electrical supply configurations. Models may feature a 6-15P, 6-20P, or 6-30P plug. For example, the PTH093J50AXXX uses a 6-15P plug, the PTH123J50AXXX uses a 6-20P plug, and the PTH153J35AXXX uses a 6-30P plug. The plug type corresponds to the unit's electrical requirements and must be compatible with the available receptacle. All models operate on 208/230V AC. When selecting a PTAC, it is important to verify the plug type matches the building's electrical infrastructure to ensure safe and proper installation.

Yes, Amana PTACs with heat pump and electric heat are suitable for through-wall installation in hotel rooms, apartments, offices, and similar spaces. Their packaged design allows for individual room temperature control, which is common in hospitality and multi-tenant residential buildings. The units are available in capacities that match typical room sizes, from approximately 237 sq ft to 584 sq ft. The heat pump provides efficient heating, with electric heat as backup for colder conditions. Installation requires a wall sleeve or opening, and the unit operates on 208/230V AC. Maintenance access is typically from the room side, simplifying service in occupied spaces.

When selecting an Amana PTAC, match the cooling capacity to the room size. Amana provides guidelines: 7,100 BtuH for 237–284 sq ft, 9,000 BtuH for 300–360 sq ft, 12,000 BtuH for 400–480 sq ft, and 14,600 BtuH for 487–584 sq ft. Also consider the electrical supply: models are available with 6-15P, 6-20P, or 6-30P plugs, so verify the receptacle type. All units operate on 208/230V AC. Additionally, decide between heat pump with electric heat backup or other configurations based on climate and heating needs. Ensure the wall opening or sleeve is compatible with the chassis dimensions. For replacement, matching the existing sleeve and electrical setup can simplify installation.