AMT PUMPS

AMT Pumps engine-driven water pumps, such as the GCW3F model, can deliver up to 185 gpm at 20 ft of head. Other models like the 4229-V5 and 4229-95 offer 175 gpm and 170 gpm respectively at the same head. These pumps are available with 2 in or 3 in MNPT or FNPT ports and feature recoil-start engines. The flow rate depends on the specific model and engine configuration. For applications requiring higher flow, multiple pumps can be used in parallel. 3G Electric stocks a range of these pumps to meet various dewatering and transfer needs.

AMT Pumps submersible dewatering pumps feature cast iron volutes and impellers, with some models using high chrome impellers for increased wear resistance. Shaft seals are either carbon/ceramic or silicon carbide, depending on the model. For example, the 577E-95 has a cast iron volute, high chrome impeller, and silicon carbide shaft seal, while the 5981-95 uses a cast iron volute and impeller with a carbon/ceramic shaft seal. These materials provide durability in continuous duty applications. The pumps are available in 115V or 460V AC configurations and can handle solids up to 3/8 in diameter.

AMT Pumps engine-driven water pumps are primarily designed for clear water transfer and dewatering. For trash applications, AMT Pumps offers specific trash pump models that can handle larger solids. The engine-driven water pumps listed, such as the GCW2F and GCW3F, are not intended for trash service. However, they can handle some debris depending on the volute and impeller design. For reliable trash handling, consult the AMT Pumps catalog for models with larger solids passage. 3G Electric can assist in selecting the appropriate pump for your application based on the required solids handling capability.

The AMT Pumps 577E-95 is a 7 1/2 hp submersible dewatering pump rated for 460V AC, featuring a cast iron volute, high chrome impeller, and silicon carbide shaft seal. It handles solids up to 3/8 in diameter and includes a cord with bare wires. The 5981-95 is a 1 hp pump rated for 115V AC, with a cast iron volute and impeller, carbon/ceramic shaft seal, and includes a hose adapter. Both are continuous duty and suitable for sumps, pits, and flooded areas. The choice depends on the available power supply and required flow rate. The 577E-95 is suited for higher voltage industrial settings, while the 5981-95 is for standard 115V applications.

Yes, AMT Pumps engine-driven water pumps are self-priming centrifugal pumps. They are designed to prime themselves when the pump casing is filled with water initially. This makes them suitable for dewatering applications where the pump may be located above the water level. The recoil-start engine drives the impeller, creating suction to draw water into the pump. Models like the GCW2F and GCW3F are commonly used for temporary dewatering on construction sites. Proper priming procedures should be followed to ensure reliable operation. 3G Electric provides these pumps with the necessary components for setup.

3G Electric supplies AMT Pumps products globally and provides support in selecting the appropriate model based on flow rate, head, port size, voltage, and material construction. We offer access to a range of engine-driven and submersible dewatering pumps, along with related components. Our team can assist with technical specifications and availability. For procurement, we handle orders worldwide and can provide quotes for specific models. We do not provide installation or repair services, but we can facilitate access to replacement parts and accessories as needed. Contact us with your requirements for a prompt response.