CANTEX

3G Electric carries CANTEX PVC conduit fittings in trade sizes from 1/2 in to 6 in, including 90-degree elbows, service entrance caps, reducers, and conduit outlet bodies. Specific sizes vary by product family. For example, service entrance caps are available in 1-1/2 in, 2 in, 2-1/2 in, and 3 in trade sizes. Reducers transition between different conduit diameters, such as 2 in to 1-1/2 in. Outlet bodies come in hub sizes like 3/4 in and 2-1/2 in with varying body capacities. If a required size is not listed, 3G Electric can source it through its supplier network. Contact 3G Electric with the exact trade size and configuration needed for a quote.

Yes, CANTEX PVC conduit bodies are made from non-metallic materials that resist moisture, ultraviolet exposure, and temperature extremes, making them suitable for outdoor and underground applications. Many models include gaskets and covers to maintain a sealed enclosure. For example, the CANTEX LB and C outlet bodies are supplied with gaskets, lids, and screws to protect conductors from the environment. Service entrance caps are specifically designed to seal the top of conduit risers, preventing water, debris, and pests from entering the raceway. When installing outdoors, ensure all fittings are properly secured and gaskets are seated to maintain the intended protection. Always verify local code requirements for the specific installation.

CANTEX Schedule 40 and Schedule 80 PVC conduit differ primarily in wall thickness and mechanical strength. Schedule 40 has a thinner wall and is typically used in applications where physical damage is unlikely, such as underground direct burial or encased in concrete. Schedule 80 has a thicker wall, providing greater resistance to impact and crushing, and is often specified for exposed locations or where additional mechanical protection is needed. Both are non-metallic and corrosion-resistant. The trade size remains the same, but the outside diameter differs, so fittings must match the schedule. 3G Electric stocks CANTEX fittings for both schedules. Verify the schedule required by your project specifications before ordering.

To select a CANTEX service entrance cap, first determine the trade size of your PVC conduit riser. The cap must match that trade size to ensure a proper fit. CANTEX offers caps in sizes such as 1-1/2 in, 2 in, 2-1/2 in, and 3 in. Consider the number and size of conductors that will pass through the cap; the cap must accommodate the conductor bundle while maintaining a weather-resistant seal. Service entrance caps are typically installed at the top of a conduit run where it enters a building or meter box. They prevent moisture, debris, and pests from entering the conduit while allowing conductors to pass. For assistance, provide 3G Electric with your conduit trade size and conductor details.

Many CANTEX PVC conduit fittings carry UL listings, as indicated in product specifications. For example, the service entrance caps and reducers listed by 3G Electric reference UL standards. However, not all products may be listed, and listings can vary by specific model. Always check the individual product datasheet or markings on the fitting to confirm the applicable listing. 3G Electric provides product documentation with orders when available. If a specific certification is required for your project, contact 3G Electric to verify the listing status of the exact part number before purchase.

Yes, 3G Electric supplies CANTEX conduit outlet bodies that include gaskets, lids, and screws as part of the assembly. For example, the CANTEX LB - 90° Elbow Type outlet body (SKU 793PL6) includes reducer bushings, gasket, lid, and screws. The C - Straight Type outlet body (SKU 4FYR2) includes gasket, lid, and screws. These accessories are necessary for maintaining the environmental rating of the enclosure. If you need replacement gaskets or covers separately, 3G Electric can source them. Provide the specific CANTEX part number or describe the outlet body type and size for accurate fulfillment.