OEM

OEM ELV solenoid valves are rated for 230V AC control circuits, which is standard for industrial burner and boiler control panels. This voltage rating ensures compatibility with common plant electrical systems. When selecting a valve, verify the coil voltage against your control circuit to avoid damage. The ELV series is designed for on/off control of gas or liquid flow in combustion systems. Always check the product datasheet for specific pressure and flow ratings, as these vary by model.

OEM FLU oil nozzles follow atomizer type designations, such as 24-P-10. The first number indicates the flow rate in US gallons per hour at 100 psi, the letter indicates the spray pattern (e.g., P for solid cone), and the last number indicates the spray angle in degrees. For example, a 24-P-10 nozzle delivers 2.4 GPH with a 10° spray angle. Match the nozzle to your burner's manufacturer specifications, including flow rate, pattern, and angle, to ensure proper atomization and combustion efficiency. Consult the burner manual or a technical datasheet for exact requirements.

OEM ELC electrodes are threaded for NPT or metric ports, with sizes starting at 1/4" and larger bores. The thread type and size must match the port on your burner or boiler to ensure a secure seal and proper flame detection. NPT threads are common in North American equipment, while metric threads are used in European systems. Check the product listing for the specific thread designation, and use a thread gauge if necessary to confirm compatibility. Incorrect threading can lead to gas leaks or electrode failure.

Yes, OEM motor run capacitors are designed for continuous duty in AC motor applications. They are constructed with polypropylene film, which provides stable capacitance over time and withstands the electrical stress of continuous operation. Available ratings include 16 µF at 400V and 2.5 µF at 450V, with a frequency range of 50/60 Hz. These capacitors are used in single-phase motors to improve power factor and running efficiency. Ensure the capacitance and voltage rating match your motor's requirements to avoid overheating or premature failure.

The Siemens GBB341.1E rotary air damper actuator has a nominal torque of 25 Nm, suitable for air dampers up to 4 m² in area. It operates on AC 24V or AC 100–240V, with a 3-position control signal. The actuator features a mechanically adjustable span, allowing you to set the angle of rotation to match damper travel. This model is part of the Siemens GBB series, known for reliability in HVAC and combustion air control. Verify the control voltage and torque requirements of your damper before installation.

OEM RAC fittings are available in small-radius bend configurations, such as 90° with female-female (FF) connections, in sizes like 1"5/8. These fittings are designed for tight installation spaces where standard-radius bends would not fit. When selecting, measure the pipe outer diameter and the required bend angle. The small radius allows for a compact turn, reducing the overall footprint of the piping run. Ensure the fitting material is compatible with the fluid and pressure of your system. Check the product datasheet for exact dimensions and pressure ratings.