Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

CLASSIC

CLASSIC is a manufacturer of hydronic baseboard heating equipment, with a product line centered on assembled heaters and the trim and finishing components required to complete an installation. The brand's catalog includes assembled hydronic baseboard heaters and a range of accessories such as end caps, corner pieces, and wall trim. These products are used in hydronic heating systems where hot water circulates through a heating element to provide radiant and convective heat. The assembled heaters feature copper tubing elements, typically 3/4 inch in diameter with SWT (sweat) connections, and aluminum fins to transfer heat to the surrounding air. The elements are supported by slide cradles that allow for expansion and contraction. The trim and finishing components are made from extruded aluminum and are finished in white, providing a clean appearance and protecting the ends and corners of the heater runs. These components include left and right solid end caps, left and right hinged end caps, inside and outside corner pieces, and wall trim. The hinged end caps allow access to internal components for maintenance without removing the entire heater. The solid end caps provide a finished look at the ends of a heater run. The corner pieces cover gaps where heater sections meet at inside or outside corners. The wall trim covers the gap between the heater and the wall. All trim components are designed to match the white finish of the assembled heaters. 3G Electric supplies the CLASSIC line as part of its industrial equipment distribution portfolio. 3G Electric is a Singapore-headquartered distributor with global reach, serving plant engineers, maintenance managers, and procurement specialists. The company provides logistics support and access to technical specifications for the products it carries. For the CLASSIC line, 3G Electric offers assembled hydronic baseboard heaters and the associated trim and finishing components, allowing customers to source complete installations from a single supplier. The product range includes various lengths of assembled heaters and the necessary accessories to complete an installation. 3G Electric's role is to facilitate the procurement of these components, ensuring that customers can obtain the correct parts for their hydronic heating systems. The company does not manufacture these products but distributes them as part of its broader catalog of industrial equipment. This includes burners, pumps, gas controls, and related equipment. The CLASSIC line complements these offerings by providing hydronic heating solutions for commercial and industrial spaces. The products are suitable for applications where a hydronic heating system is preferred, such as in buildings with existing boiler systems or where radiant heat is desired. The trim components are essential for a finished installation, covering gaps and providing a neat appearance. The use of extruded aluminum for the trim components offers durability and resistance to corrosion. The white finish is standard, allowing the heaters to blend with typical interior walls. The assembled heaters are available in various lengths, with the 5-foot model being one example. The heating elements are copper, which is a common material for hydronic systems due to its thermal conductivity and resistance to corrosion. The aluminum fins increase the surface area for heat transfer. The SWT connections allow for soldering to copper piping. The element slide cradles accommodate thermal expansion. These features are typical of hydronic baseboard heaters and are designed to provide reliable performance when installed correctly. 3G Electric supports the CLASSIC line by stocking these products and providing logistics support for global shipping. Customers can request quotes and compare specifications. The company's focus is on serving the needs of technical buyers who require specific components for their heating systems. By offering the CLASSIC line, 3G Electric provides access to a range of hydronic baseboard heating products and accessories. This allows customers to maintain and install hydronic heating systems with components from a single brand. The product line is part of 3G Electric's broader offering of industrial equipment, which includes various product families for different applications. The CLASSIC brand is known for its hydronic baseboard heaters and accessories, and 3G Electric distributes these products to customers worldwide.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 2 of 2
← Prev12Next →

About CLASSIC

CLASSIC is a manufacturer of hydronic baseboard heating equipment, with a product line centered on assembled heaters and the trim and finishing components required to complete an installation. The brand's catalog includes assembled hydronic baseboard heaters and a range of accessories such as end caps, corner pieces, and wall trim. These products are used in hydronic heating systems where hot water circulates through a heating element to provide radiant and convective heat. The assembled heaters feature copper tubing elements, typically 3/4 inch in diameter with SWT (sweat) connections, and aluminum fins to transfer heat to the surrounding air. The elements are supported by slide cradles that allow for expansion and contraction. The trim and finishing components are made from extruded aluminum and are finished in white, providing a clean appearance and protecting the ends and corners of the heater runs. These components include left and right solid end caps, left and right hinged end caps, inside and outside corner pieces, and wall trim. The hinged end caps allow access to internal components for maintenance without removing the entire heater. The solid end caps provide a finished look at the ends of a heater run. The corner pieces cover gaps where heater sections meet at inside or outside corners. The wall trim covers the gap between the heater and the wall. All trim components are designed to match the white finish of the assembled heaters. 3G Electric supplies the CLASSIC line as part of its industrial equipment distribution portfolio. 3G Electric is a Singapore-headquartered distributor with global reach, serving plant engineers, maintenance managers, and procurement specialists. The company provides logistics support and access to technical specifications for the products it carries. For the CLASSIC line, 3G Electric offers assembled hydronic baseboard heaters and the associated trim and finishing components, allowing customers to source complete installations from a single supplier. The product range includes various lengths of assembled heaters and the necessary accessories to complete an installation. 3G Electric's role is to facilitate the procurement of these components, ensuring that customers can obtain the correct parts for their hydronic heating systems. The company does not manufacture these products but distributes them as part of its broader catalog of industrial equipment. This includes burners, pumps, gas controls, and related equipment. The CLASSIC line complements these offerings by providing hydronic heating solutions for commercial and industrial spaces. The products are suitable for applications where a hydronic heating system is preferred, such as in buildings with existing boiler systems or where radiant heat is desired. The trim components are essential for a finished installation, covering gaps and providing a neat appearance. The use of extruded aluminum for the trim components offers durability and resistance to corrosion. The white finish is standard, allowing the heaters to blend with typical interior walls. The assembled heaters are available in various lengths, with the 5-foot model being one example. The heating elements are copper, which is a common material for hydronic systems due to its thermal conductivity and resistance to corrosion. The aluminum fins increase the surface area for heat transfer. The SWT connections allow for soldering to copper piping. The element slide cradles accommodate thermal expansion. These features are typical of hydronic baseboard heaters and are designed to provide reliable performance when installed correctly. 3G Electric supports the CLASSIC line by stocking these products and providing logistics support for global shipping. Customers can request quotes and compare specifications. The company's focus is on serving the needs of technical buyers who require specific components for their heating systems. By offering the CLASSIC line, 3G Electric provides access to a range of hydronic baseboard heating products and accessories. This allows customers to maintain and install hydronic heating systems with components from a single brand. The product line is part of 3G Electric's broader offering of industrial equipment, which includes various product families for different applications. The CLASSIC brand is known for its hydronic baseboard heaters and accessories, and 3G Electric distributes these products to customers worldwide.

Common Applications

  • Commercial buildings — CLASSIC assembled hydronic baseboard heaters provide radiant and convective heat in offices, lobbies, and corridors.
  • Residential multi-family housing — CLASSIC hydronic baseboard heaters with white trim components offer a finished appearance in apartments and common areas.
  • Institutional facilities — CLASSIC hinged end caps allow maintenance access to heater elements in schools, hospitals, and government buildings.
  • Hospitality industry — CLASSIC hydronic baseboard heaters with wall trim provide quiet, even heat in hotel guest rooms and meeting spaces.
  • Retail spaces — CLASSIC inside and outside corner trim components finish baseboard heater runs around columns and architectural features.
  • Industrial offices — CLASSIC hydronic baseboard heaters with solid end caps deliver reliable supplemental heat in plant offices and control rooms.

Frequently asked questions

Common questions about CLASSIC from 3G Electric.

What types of trim and finishing components are available for CLASSIC hydronic baseboard heaters?

CLASSIC offers a range of trim and finishing components for hydronic baseboard heaters, including left and right solid end caps, left and right hinged end caps, inside and outside corner pieces, and wall trim. These components are made from extruded aluminum with a white finish. The solid end caps provide a finished appearance at the ends of a heater run. The hinged end caps allow access to internal components for maintenance. The corner pieces cover gaps where heater sections meet at inside or outside corners. The wall trim covers the gap between the heater and the wall. All components are designed to match the white finish of the assembled heaters. These accessories are essential for a complete and professional installation.

What are the specifications of the CLASSIC assembled hydronic baseboard heater?

The CLASSIC assembled hydronic baseboard heater features a copper tubing heating element with a 3/4 inch tube diameter and SWT (sweat) connections. It includes aluminum fins to enhance heat transfer and element slide cradles to accommodate thermal expansion. The heater has a white finish and is available in various lengths, such as 5 feet. The overall dimensions vary by length. The heater is designed for hydronic heating systems where hot water circulates through the element. The copper tubing and aluminum fins are standard materials for efficient heat transfer. The SWT connections allow for soldering to copper piping. The element slide cradles support the element and allow for movement during heating and cooling cycles.

How do I choose between solid and hinged end caps for CLASSIC hydronic baseboard heaters?

The choice between solid and hinged end caps for CLASSIC hydronic baseboard heaters depends on the need for access to internal components. Solid end caps (left hand CL-3LEC and right hand CL-3REC) provide a finished appearance at the ends of a heater run and are used when no access is required. Hinged end caps (left hand CL-LEC and right hand CL-REC) also provide a finished appearance but allow the cap to be opened for access to internal components, such as the heating element or connections, for maintenance or adjustment. Hinged end caps are typically used at locations where service access is desired. Both types are made of white extruded aluminum and measure 3 inches by 9 inches by 3-1/2 inches for solid caps and 4 inches by 9 inches by 3-1/2 inches for hinged caps.

What are the dimensions of the CLASSIC inside and outside corner trim components?

The CLASSIC inside corner 90-degree trim component (SKU 4NHX4) measures 5 inches in length, 7-1/4 inches in height, and 6 inches in depth. The outside corner 90-degree trim component (SKU 4NHX5) measures 5 inches in length, 7 inches in height, and 7 inches in depth. Both are made of white extruded aluminum and are used to cover gaps and provide a finished appearance where baseboard heater sections meet at inside or outside corners. These components are part of the trim and finishing accessories for CLASSIC hydronic baseboard heaters. They are designed to match the profile of the heater and the white finish.

What is the purpose of the CLASSIC wall trim component?

The CLASSIC wall trim component (SKU 4NHX6) is a white extruded aluminum accessory used to cover the gap between the hydronic baseboard heater and the wall. It measures 4 inches in length, 9 inches in height, and 2-1/2 inches in depth. This trim provides a finished appearance by closing the space between the back of the heater and the wall surface. It is part of the trim and finishing components for CLASSIC hydronic baseboard heaters. The wall trim is typically installed along the top edge of the heater where it meets the wall. It is made of extruded aluminum with a white finish to match the heater and other trim components.

Are CLASSIC hydronic baseboard heaters compatible with standard hydronic heating systems?

CLASSIC hydronic baseboard heaters are designed for use in standard hydronic heating systems. They feature a 3/4 inch copper tubing heating element with SWT (sweat) connections, which are common in hydronic systems. The heaters are intended to be connected to a hot water supply, typically from a boiler, and use aluminum fins to transfer heat to the air. The element slide cradles accommodate thermal expansion. These heaters are suitable for systems that circulate hot water or a water-glycol mixture. They are not intended for steam systems. Installation should be performed by qualified personnel following local codes and manufacturer instructions. The heaters are available in various lengths to suit different room sizes and heating requirements.