CLIMAX METAL PRODUCTS

A one-piece Climax shaft collar, such as the C-175-A or C-100-S, slides onto a shaft from the end and is secured with a set screw or clamping mechanism. A two-piece collar splits radially, allowing installation or removal without disassembling the shaft. One-piece collars are simpler and often used where the shaft end is accessible. Two-piece collars are preferred for maintenance on assembled equipment or where axial positioning must be adjusted without removing other components. Both types are available in aluminum, stainless steel, and steel, with bore sizes from fractional inch to metric.

Climax screw lock-type wheel arbors in the 3G Electric catalog cover wheel arbors from 1/16 in to 3/8 in and shanks from 1/8 in to 1/4 in. Specific models include M-080 (1/16 in wheel arbor, 1/8 in shank), M-21-6 and M-21-4 (1/8 in wheel arbor, 1/4 in shank), M-14-3 and M-14-2 (1/4 in wheel arbor, 1/4 in shank), and M-23-L (3/8 in wheel arbor, 1/4 in shank). These arbors use a screw lock mechanism to secure the wheel during grinding or cutting operations. Selection depends on the tool spindle shank and the wheel arbor hole diameter.

Climax shaft collars are commonly available in aluminum, stainless steel, and steel. Aluminum collars, such as the C-175-A, offer low weight and are suitable for applications where corrosion resistance is not critical. Stainless steel collars, such as the C-100-S, provide higher corrosion resistance and are used in food processing, chemical, and marine environments. Steel collars offer high strength and are often specified for heavy-duty power transmission. Material selection affects weight, torque capacity, and environmental compatibility. Buyers should confirm the specific material and finish required for their application.

Selecting a Climax keyless bushing requires knowing the shaft diameter, hub bore, torque requirement, and axial load. Keyless bushings transmit torque through friction generated by tightening screws, eliminating the need for keyways. They are specified by inner diameter (shaft) and outer diameter (hub), along with torque and thrust capacity ratings. Climax offers metric and inch sizes. For high-torque or reversing applications, verify the bushing's rated capacity against the actual load with a safety factor. 3G Electric can provide dimensional data and part numbers for specific Climax keyless bushing series.

Climax rigid couplings are available in a range of bore sizes and materials, including aluminum, stainless steel, and steel. They are used to connect two shafts in line for torque transmission without misalignment compensation. Rigid couplings are typically specified by bore diameter, outside diameter, and overall length. Some designs include keyways or set screws for additional holding power. For applications requiring corrosion resistance, stainless steel is common. For reduced weight, aluminum is used. 3G Electric stocks and sources Climax rigid couplings; provide the shaft diameters and torque requirements for a specific recommendation.

A Climax wheel arbor adapts a grinding or cutting wheel to a tool spindle. The arbor has a shank that fits the tool's chuck or collet and a wheel arbor diameter that matches the wheel's center hole. The screw lock mechanism secures the wheel concentrically and prevents slipping during rotation. Proper arbor selection ensures wheel runout is minimized and the wheel is held safely at operating speed. Climax screw lock-type wheel arbors are used in metalworking, fabrication, and maintenance applications where wheels are changed frequently or where a secure mount is required.