bolt

Electrical & Automation

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1 of 377

Straight nylon cable grip with PG16 male thread for box connection. Accepts cord diameters from 0.23 to 0.53 inches. Rated IP66 for protection against dust and water jets. Overall length 1 11/16 inches. Suitable for sealing and strain-relieving cables entering enclosures in wet or washdown environments.

HUBBELL WIRING DEVICE-KELLEMS

HUBBELL WIRING DEVICE-KELLEMS Straight Plastic Cable Grip

BrandHUBBELL WIRING DEVICE-KELLEMS

Sign inAvailable

This 1-channel cable ramp protects hoses and cables on floors in areas with vehicle traffic. Made of black rubber, it supports up to 2000 lb per axle. The T-shaped connection style allows multiple ramps to be linked for extended runs. Suitable for industrial, warehouse, and event floor applications.

ELECTRIDUCT

ELECTRIDUCT 1-Channel Drop-Over Cable Ramp

BrandELECTRIDUCT

Sign inAvailable

This yellow cable tie is designed for bundling and securing wires, cables, or hoses in outdoor environments. With a 12-inch length and 3 1/4-inch maximum bundle diameter, it suits medium-duty cable management tasks. The yellow color aids visibility for safety marking or color-coding. Pack of 100.

OEM

OEM Yellow Colored Cable Tie

BrandOEM

Sign inAvailable

Straight metallic cable grip for securing and sealing cords in Class I, Division 2 hazardous locations. Connects 0.31-0.38 in diameter cord to a 1/2 in MNPT box. Aluminum body with silver finish and white color-coded grommet. NPT threading provides strain relief and environmental protection.

RACO

RACO Straight Hazardous Location Metallic Cable Grip

BrandRACO

Sign inAvailable

Clear polyolefin heat shrink tubing with a 2:1 shrink ratio. Inner diameter before shrinking is 0.63 inches; length is 6 inches. Provides electrical insulation and mechanical protection for wiring and connections. Supplied in a 10-pack.

OEM

OEM APPROVED VENDOR Standard Heat Shrink Tubing

BrandOEM

Sign inAvailable

Black heat shrink breakout boots with a 1.57-inch inside diameter before shrinking and 4.3-inch length. Supplied in a pack of 10. Used to seal and protect cable splices and terminations in electrical systems, providing environmental sealing against moisture, dust, and mechanical stress.

ELECTRIDUCT

ELECTRIDUCT HSB-2-1.5-10PK Heat Shrink Breakout Boots

BrandELECTRIDUCT

Sign inAvailable

Black nylon cable tie with a nominal length of 24 1/2 inches, width of 0.26 inches, and a maximum bundle diameter of 7 inches. Suitable for outdoor use, it provides secure bundling of cables, wires, and hoses in industrial and commercial settings. Supplied in a 50-pack.

TY-RAP

TY-RAP Fine Adjustment Cable Tie

BrandTY-RAP

Sign inAvailable

Stainless steel swivel nipple for connecting sections of corrosion-resistant washdown wireways. Measures 4 in wide, 4 in high, and 2 1/4 in long. Used in environments requiring resistance to high-pressure cleaning and corrosive chemicals.

HAMMOND MANUFACTURING

HAMMOND MANUFACTURING 1487CV2SS Swivel Nipple for

BrandHAMMOND MANUFACTURING

Sign inAvailable

This 90° nylon cord connector accepts cord diameters from 0.63 in to 0.75 in and connects to a 3/4 in MNPT box. Rated IP66 and Class II, Division 1 & 2 for hazardous locations, it provides liquid-tight sealing and strain relief in industrial environments. The gray body and yellow color-coded grommet facilitate identification.

HUBBELL WIRING DEVICE-KELLEMS

HUBBELL WIRING DEVICE-KELLEMS 90° Plastic Cable Grip

BrandHUBBELL WIRING DEVICE-KELLEMS

Sign inAvailable

This 316 stainless steel cable tie is designed for bundling and securing cables, hoses, or wires in demanding environments. With a ball lock locking style, it provides a vibration-resistant hold. The tie has a nominal length of 8 inches, a width of 0.31 inches, and a maximum bundle diameter of 2 inches. Supplied in a pack of 50, in silver color.

TY-RAP

TY-RAP LS-7.9-200B 316 Stainless Steel Cable Tie

BrandTY-RAP

Sign inAvailable

← Prev1 2 3…377 Next →