FACOM

FACOM insulated tools are rated for use up to 1000V AC and 1500V DC, complying with IEC 60900 and EN 60900 standards. This rating applies to products such as the insulated adjustable wrenches (e.g., FA-113.10TAVSE) and insulated socket sets (e.g., FC-J.401AVSE, FC-S.400AVSE). The insulation is tested to withstand dielectric strength and impact requirements. Users should inspect tools before each use for damage to the insulating layer, as compromised insulation can reduce protection. These tools are intended for live-line work in electrical maintenance and repair.

FACOM metric insulated socket sets, such as the 17-piece FC-J.401AVSE and 12-piece FC-S.400AVSE, include 12-point sockets ranging from 8 mm to 19 mm. The FC-J.401AVSE has a 3/8-inch drive and a 7-1/2-inch round head ratchet, while the FC-S.400AVSE has a 1/2-inch drive and a 10-5/16-inch round head ratchet. Both sets are designed for electrical safety applications and include drive tools. The sockets are made of alloy steel with an insulated coating. These sets are suitable for tightening and loosening fasteners in live electrical environments.

The FACOM FA-113.10TAVSE insulated adjustable wrench has a jaw capacity of 1-3/16 inches (approximately 30 mm) and an overall length of 10 inches. It is constructed from alloy steel with a chrome finish and insulated handles for electrical safety. The wrench is designed for applications where live electrical components may be present, and it complies with insulation standards for 1000V AC. The adjustable jaw allows for use on various fastener sizes within its capacity range. This tool is part of FACOM's insulated tool line, which includes wrenches, socket sets, and other hand tools.

FACOM SAE 6-point combination wrenches, such as the FM-39.5H and FM-39.5.5H, are made of alloy steel with a satin finish. They feature a 6-point box end and an open end, with an offset design for accessing recessed fasteners. The FM-39.5H has a 5 mm head size and an overall length of 3-1/8 inches, while the FM-39.5.5H has a 5.5 mm head size and an overall length of 3-1/4 inches. These wrenches are suitable for tightening or loosening fasteners in confined spaces. The satin finish provides corrosion resistance and reduces glare.

FACOM fixed-head double-end socket end wrenches, such as the FM-76.16, FM-76.19, and FM-76.30, differ primarily in socket size and overall length. The FM-76.16 has a 16 mm socket size and a length of 7-1/64 inches; the FM-76.19 has a 19 mm socket size and a length of 8-1/32 inches; the FM-76.30 has a 30 mm socket size and a length of 12-13/64 inches. All feature a 12-point/6-point configuration for versatile fastener engagement and are made of alloy steel. These wrenches are designed for tightening or loosening hex and square fasteners in industrial and automotive applications.

FACOM produces tools that are used in aerospace and other precision industries, but suitability depends on the specific application and required certifications. Many FACOM tools are made from alloy steel with tight tolerances and finishes that resist corrosion. For aerospace work, users should verify that the tool meets the relevant specifications, such as dimensions, material, and any required traceability. FACOM's insulated tools are used in electrical maintenance, while standard tools are used for mechanical assembly. 3G Electric can provide product specifications to assist in determining if a tool meets application requirements.