Fireye

The MART1 and MAUV1 are amplifier modules designed for use with the Fireye Modular M-Series II control chassis. The primary difference lies in the flame detection technology they support. MART1 is typically used with infrared (IR) flame detectors, while MAUV1 is designed for ultraviolet (UV) flame detectors. Both modules include test jacks for measuring the flame signal during operation, which aids in diagnostics. They are plug-in designs for easy installation and replacement. The choice between them depends on the burner type and the fuel being burned, as UV detectors are more sensitive to certain flame characteristics, while IR detectors may be better suited for other conditions. Always verify compatibility with your specific M-Series II chassis and burner configuration.

The Fireye UV1AL series flame scanners carry CE, cULus, and FM approvals. These certifications indicate that the scanners meet recognized safety and performance standards for industrial combustion equipment. CE marking is required for sale in the European Economic Area, while cULus and FM approvals are recognized in North America for safety and property protection. These approvals are important for ensuring compliance with local codes and insurance requirements in various jurisdictions. When selecting a flame scanner, verify that the specific model's approvals match the requirements of your installation site.

The Fireye PMSTR-6000 Plant Master is designed to sequence and control up to ten NX6100 or PPC6000 efficiency controls in steam and hot water plant applications. It acts as a supervisory controller, coordinating the operation of multiple burner controls to optimize plant efficiency and maintain safety interlocks. The PMSTR-6000 is UL Listed, ensuring it meets safety standards for this type of equipment. Integration typically involves wiring the Plant Master to each NX6100 or PPC6000 unit, allowing it to issue commands and receive status signals. This setup enables centralized management of multiple burners, which is useful in larger facilities with several boilers.

The Fireye UV90 series flame scanners are designed for both front and lateral (90°) mounting. This flexibility allows the scanner to be positioned either directly facing the flame or at a right angle, depending on the burner housing geometry and space constraints. The UV90 series detects ultraviolet radiation emitted by flames, making it suitable for gas and oil burners. The scanners carry cULus and FM approvals, indicating compliance with North American safety standards. When installing, ensure the scanner's viewing angle is aligned with the flame's UV radiation zone for reliable detection.

Fireye NXC series servo actuators operate on 24-30 Vac, which is supplied from the control unit. They have a rotation speed of 30 seconds for 90 degrees of rotation, providing a controlled and consistent movement for damper or valve positioning. The series includes models such as NXC04, NXC12, NXC20, and NXC40, which differ in power consumption (5 VA, 10 VA, 18 VA) and ingress protection ratings (IP40, IP54). These actuators are used in combustion control systems to modulate air or fuel flow, and their speed is suitable for applications requiring precise positioning without rapid changes.

Yes, the Fireye SureFire II Heavy Duty High Energy Igniter (HDHEI) is specifically designed for direct ignition of liquid fuels such as medium oil and heavy oil. It provides a high-energy spark that can reliably ignite these fuels, which are more difficult to ignite than lighter fuels like natural gas. The HDHEI carries CE, Ex, and FM approvals, indicating suitability for potentially explosive atmospheres and compliance with international safety standards. It is available as an integrated system, a kit, or a kit with quick disconnect, allowing for flexibility in installation and maintenance. This igniter is suitable for industrial burners in applications like boilers, furnaces, and process heaters.