Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
FLEXPIPE logo

FLEXPIPE

FLEXPIPE is a product line of modular clamp-on pipe systems and steel framing components used to build industrial workstations, material handling structures, and pipe support frameworks. The system is based on 28 mm pipe, which is joined with clamp-on connectors rather than welded or threaded joints, allowing structures to be assembled, adjusted, or disassembled on site with hand tools. The FLEXPIPE range includes pipes, clamps, casters and feet, roller tracks, and track accessories. Roller tracks are available in cold rolled steel and hot rolled steel, with galvanized finishes for corrosion resistance. Track lengths include 47 83/100 inches and 96 inches, and the tracks are designed to support and guide 28 mm pipe while reducing friction during linear movement. Track mount accessories such as drop stops, stabilizers, and tab stops are made from steel with zinc finishes and are used to secure pipe runs, prevent axial movement, and stabilize roller track sections. Caster kits include rigid and swivel options; the rigid caster kit in this line has a rubber wheel, a silver/gray finish, and a maximum load capacity of 250 lb. These components are used in assembly stations, flow racks, cart and dolly frames, and other structures where pipe-based framing is preferred over welded steel. 3G Electric supplies the FLEXPIPE line globally, with individual components and kits available for maintenance, repair, and new builds. The catalog includes dimensional and material specifications for each item, allowing plant engineers and maintenance managers to match components to existing 28 mm pipe systems. Because the system is modular, replacement parts can be ordered without replacing entire structures. 3G Electric supports the line with product data, quote requests, and order fulfillment for industrial buyers.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 9 of 19

About FLEXPIPE

FLEXPIPE is a product line of modular clamp-on pipe systems and steel framing components used to build industrial workstations, material handling structures, and pipe support frameworks. The system is based on 28 mm pipe, which is joined with clamp-on connectors rather than welded or threaded joints, allowing structures to be assembled, adjusted, or disassembled on site with hand tools. The FLEXPIPE range includes pipes, clamps, casters and feet, roller tracks, and track accessories. Roller tracks are available in cold rolled steel and hot rolled steel, with galvanized finishes for corrosion resistance. Track lengths include 47 83/100 inches and 96 inches, and the tracks are designed to support and guide 28 mm pipe while reducing friction during linear movement. Track mount accessories such as drop stops, stabilizers, and tab stops are made from steel with zinc finishes and are used to secure pipe runs, prevent axial movement, and stabilize roller track sections. Caster kits include rigid and swivel options; the rigid caster kit in this line has a rubber wheel, a silver/gray finish, and a maximum load capacity of 250 lb. These components are used in assembly stations, flow racks, cart and dolly frames, and other structures where pipe-based framing is preferred over welded steel. 3G Electric supplies the FLEXPIPE line globally, with individual components and kits available for maintenance, repair, and new builds. The catalog includes dimensional and material specifications for each item, allowing plant engineers and maintenance managers to match components to existing 28 mm pipe systems. Because the system is modular, replacement parts can be ordered without replacing entire structures. 3G Electric supports the line with product data, quote requests, and order fulfillment for industrial buyers.

Common Applications

  • Industrial workstations — FLEXPIPE clamp-on pipe systems with 28 mm pipe and clamp-on connectors for assembly and fabrication stations.
  • Material handling carts — FLEXPIPE rigid caster kit W-4PF-KIT with rubber wheels and 250 lb capacity for mobile pipe-frame carts.
  • Flow racks and gravity conveyors — FLEXPIPE roller tracks R40-RT48BD and R40-RT96FL for guiding 28 mm pipe or product movement.
  • Pipe support and guidance — FLEXPIPE roller tracks R85-RT96 and R85-RT96SR for linear pipe movement in industrial piping installations.
  • Track end stops and positioning — FLEXPIPE drop stop R85-DS and tab stop R85-TS to prevent pipe or hose sliding and axial movement.
  • Track stabilization — FLEXPIPE track mount stabilizer R85-CS to maintain alignment and rigidity in longer roller track runs.

Frequently asked questions

Common questions about FLEXPIPE from 3G Electric.

What pipe size does the FLEXPIPE clamp-on pipe system use?

FLEXPIPE clamp-on pipe systems are built around 28 mm pipe. Roller tracks in the line, including the R40-RT48BD, R40-RT96FL, R85-RT96SR, and R85-RT96, are designed to accommodate 28 mm pipe. Clamps and connectors in the system are sized to match this pipe diameter. When specifying components, confirm that the pipe outside diameter is 28 mm to ensure proper fit with clamps, roller tracks, and track accessories. The modular design allows pipe sections to be joined without welding or threading, using clamp-on connectors that are tightened with hand tools.

What is the load capacity of the FLEXPIPE caster kit?

The FLEXPIPE rigid caster kit, SKU W-4PF-KIT, has a maximum load capacity of 250 lb. It includes one caster with a rubber wheel and a silver/gray finish. This kit is intended for use with clamp-on pipe systems in industrial workstations and material handling setups. Load capacity per structure depends on the number of casters used and the configuration of the pipe frame. For mobile workstations or carts, distribute the total load across all casters and verify that the pipe frame and connectors are rated for the intended load. The kit is a single-caster unit, so multiple kits are required for a typical four-point caster arrangement.

What are the differences between FLEXPIPE roller track models?

FLEXPIPE roller tracks differ in material, length, and roller configuration. The R40-RT48BD is a bi-directional roller track made from cold rolled steel with a galvanized finish, 47 83/100 inches long. The R40-RT96FL is a narrow roller track with flange, cold rolled steel with galvanized finish, 96 inches long. The R85-RT96SR is a staggered roller track made from hot rolled steel with a galvanized finish, 96 inches long. The R85-RT96 is a roller track made from cold rolled steel with a galvanized finish, 96 inches long. All accommodate 28 mm pipe. Selection depends on required track length, roller pattern, and whether a flanged or narrow profile is needed for the application.

What are FLEXPIPE track mount drop stops and tab stops used for?

FLEXPIPE track mount drop stops and tab stops are steel components with zinc finishes used in roller tracks and clamp-on pipe systems. The drop stop, MPN R85-DS, measures 3 9/16 inches in length and 2 7/8 inches in overall height. It prevents pipes or hoses from sliding out of the track. The tab stop, MPN R85-TS, also measures 3 9/16 inches in length and 2 7/8 inches in overall height, and is used to secure pipe runs and prevent axial movement. Both are mounted to the track and act as mechanical limits. They are typically used at the ends of roller track sections or at intermediate points where pipe travel must be restricted.

What is the FLEXPIPE track mount stabilizer used for?

The FLEXPIPE track mount stabilizer, MPN R85-CS, is a steel component with a zinc finish. It measures 3 9/16 inches in length and 2 1/8 inches in overall height. It is used to stabilize roller tracks in industrial piping installations. Stabilizers are mounted to the track and help maintain alignment and rigidity, particularly in longer track runs or where the track is subjected to lateral loads. They are part of the roller track and clamp-on pipe system accessory range. When building a track section, stabilizers can be added at intervals to reduce deflection and keep the track true to the pipe path.

Can FLEXPIPE components be used to build custom workstations or carts?

Yes. FLEXPIPE clamp-on pipe systems are modular and are used to build custom industrial workstations, material handling structures, and carts. The system includes 28 mm pipe, clamps, casters and feet, roller tracks, and track accessories. Structures are assembled with hand tools and can be adjusted or disassembled. For a mobile cart, combine pipe framing with caster kits such as the W-4PF-KIT. For flow racks or assembly stations, use roller tracks and track stops to guide and secure pipe or product movement. Because components are interchangeable within the 28 mm pipe system, custom configurations can be built from standard parts. 3G Electric supplies individual components and kits for these builds.