GM LIGHTING

About GM LIGHTING

GM LIGHTING is a manufacturer of LED tape lights and linear light connectors, with a product line centered on low-voltage, dimmable lighting solutions for architectural, commercial, and industrial applications. The brand's core offering includes LED tape lights in warm white color temperatures (2700K and 3000K), available in multiple power ratings (1.5 W and 3 W per foot) and voltage configurations (12 V and 24 V DC). These tape lights are designed with a top-bend profile, allowing for flexible installation in coves, under cabinets, or along linear surfaces. Each tape light is supplied in 16 5/16-foot lengths and includes three ESTW-series connectors for power or interconnections. The maximum run length varies by model: 12 V units are limited to 16 ft (e.g., SKU 807AR8) or 32.5 ft (e.g., SKU 807AR4), while 24 V units support runs up to 32.5 ft (e.g., SKU 807AT0) or 60 ft (e.g., SKU 807AR7). Lumen output ranges from 125 lm to 242 lm per section, depending on wattage and voltage. All tape lights are dimmable, compatible with standard low-voltage dimmers. The connector family includes tape-to-power (ESTW-CO), tape-to-tape (ESTC-1), and 60-inch lead tape-to-tape (ESTLK-60) connectors, all rated for 14 AWG maximum and 18 AWG minimum wire gauge, operating at 24 V. These connectors enable daisy-chaining or extending runs without soldering. 3G Electric stocks multiple SKUs from GM LIGHTING, covering both tape lights and connectors, to support procurement for projects requiring consistent color temperature and voltage. The product range is suited for accent lighting, task lighting, and signage applications where low-profile, energy-efficient illumination is needed. No IP ratings are specified in the available data, so these products are intended for indoor, dry-location use unless otherwise verified. The brand does not appear to offer high-power or outdoor-rated fixtures; its focus is on low-voltage linear lighting with standardized connectors for ease of installation.

Common Applications

• Architectural cove lighting — GM LIGHTING LED tape lights (e.g., SKU 807AT0, 24 V, 2700K) for indirect illumination in ceiling coves or wall niches.
• Under-cabinet task lighting — GM LIGHTING 12 V tape lights (e.g., SKU 807AR4, 1.5 W, 2700K) for work surfaces in kitchens or workshops.
• Signage backlighting — GM LIGHTING 24 V tape lights (e.g., SKU 807AR7, 1.5 W, 3000K) for channel letters or light boxes with long runs up to 60 ft.
• Display case lighting — GM LIGHTING dimmable tape lights (e.g., SKU 807AT1, 3 W, 3000K) for retail shelving or museum exhibits requiring consistent color temperature.
• Linear light extension — GM LIGHTING tape-to-tape connectors (e.g., ESTC-1, SKU 807AU1) for joining multiple tape light segments in continuous runs.
• Power feed installation — GM LIGHTING tape-to-power connectors (e.g., ESTW-CO, SKU 807AT7) for connecting tape lights to 24 V drivers in commercial lighting layouts.