JACKSON SAFETY

The Jackson Safety N95 respirators available through 3G Electric carry NIOSH approval numbers TC-84A-4543 (for the model with exhalation valve, MPN 64240) and TC-84A-4539 (for the model without exhalation valve, MPN 64230). These approvals indicate the respirators meet the N95 filtration efficiency standard, capturing at least 95% of airborne particles. The exhalation valve model is designed to reduce heat buildup during extended wear, while the non-valve model provides a standard face seal. Both models are molded, white, medium size, and come with dual non-adjustable headstraps and a metal nose clip. They are supplied in packs of 10 or 20, respectively.

Some Jackson Safety welding goggles are rated for welding use, while others are not. For example, the lift-front model with a 4.25 in x 2 in viewing area (MPN 15992) is designated as Shade 5 IRUV, suitable for gas welding, cutting, and brazing. The fixed-front model with a 1.97-inch viewing area (MPN 15993) has a Shade 5 IR lens for infrared protection during light-duty tasks such as cutting or grinding, but it is not rated for welding. Other models, such as MPN 15994, 15996, and 15991, are explicitly marked 'Not Rated for Welding Use' and are intended for impact protection during grinding, chipping, or debris tasks. Always verify the specific model's rating before use.

The Jackson Safety Maxview+ Standard Welding Safety Glasses (MPN 60001) feature a half-frame design with a black/green frame color. They are equipped with anti-fog and scratch-resistant properties, making them suitable for eye protection in industrial environments such as welding, grinding, and general plant work where impact and optical hazards exist. The Maxview+ series is part of Jackson Safety's line of safety eyewear. These glasses are not rated for welding use unless specified; they are intended for general eye protection. For specific lens shade requirements, refer to the product specifications or consult local safety regulations.

The primary difference is the presence of an exhalation valve. The model with the valve (MPN 64240) is designed to reduce heat and moisture buildup inside the respirator during extended wear, making it more comfortable in hot or humid environments. The model without the valve (MPN 64230) provides a standard face seal and may be preferred in environments where the exhalation valve could pose a contamination risk, such as sterile fields. Both are N95-rated, molded, white, medium size, and feature dual non-adjustable headstraps and a metal nose clip. They are NIOSH-approved under different TC numbers. The valve model is supplied in a 10-pack, while the non-valve model comes in a 20-pack.

Yes, certain Jackson Safety welding goggles are suitable for grinding and chipping. Models that are not rated for welding use, such as MPN 15994, 15996, and 15991, are specifically intended for impact protection during tasks like grinding, chipping, or debris removal. These goggles feature red frames and viewing areas of either 1.97 inches or 4.25 x 2 inches. They provide a physical barrier against flying particles. However, they do not provide welding-level optical protection. For welding, cutting, or brazing, select models with appropriate shade ratings, such as Shade 5 IR or Shade 5 IRUV. Always match the goggle to the specific hazard.

The Jackson Safety N95 respirators currently listed by 3G Electric are available in medium (M) size. Both the model with exhalation valve (MPN 64240) and the model without (MPN 64230) are molded, white, and medium. The headstraps are dual and non-adjustable, and the nose clip is metal. If a different size is required, check with 3G Electric for availability or alternative models. Proper fit is critical for respirator performance; users should perform a fit test according to their organization's respiratory protection program.