JW WINCO

JW WINCO bearing locknuts, such as the model 1804.1-M50X1.5, are typically made from carbon steel with a blue passivated zinc plating. This finish provides moderate corrosion resistance suitable for indoor industrial environments. The locknuts feature a polyamide insert that provides self-locking capability, preventing loosening under vibration. Thread sizes range from M50x1.5 to M55x1.5, and the nut width is typically 13 mm. For applications requiring higher corrosion resistance, stainless steel variants may be available in other product families.

JW WINCO quick-release hoist rings, like the model 1135-M12-17-ST, are designed for lifting operations with a working load limit of 6.2 kN. They feature an M12 thread size and a working pin length of 17 mm. The construction is steel, and the design allows for pivot and rotate movement to align with lifting loads. These hoist rings are intended for use in material handling and rigging applications where a secure, quick-attach lifting point is needed. Always verify the working load limit and thread compatibility with your lifting fixture.

JW WINCO shaft collars, such as models 5WG46/A and 705-5-E-ZB, are one-piece designs that use a set screw for clamping onto a shaft. The set screw can be either a slotted type (for standard screwdrivers) or a hex-drive type (for hex keys). These collars have a bore diameter of 5 mm, an outside diameter of 10 mm, and a width of 6 mm. They are made from steel and are used to position components on shafts, act as mechanical stops, or retain bearings. The set screw provides a secure grip on the shaft when tightened to the recommended torque.

JW WINCO offers several toggle clamp configurations, including horizontal U-latch toggle clamps (e.g., model 851.3-700-T6) and T-head latching bolt toggle clamps (e.g., model 850.2-500-TT). The horizontal U-latch clamps have a manual latch release and an overall depth of 56 mm. The T-head latching bolt clamps include a locking horizontal handle and allow for hook adjustment up to 8 mm. Both types are used for quick clamping in fixture and assembly applications. Additionally, JW WINCO supplies clamping arm extenders, such as model 801.1-85-16-ST, which are rigid extenders with a U-bar design and M6 spindle compatibility.

Yes, JW WINCO clevis rod ends, such as model 8NXBIS, are available in stainless steel for corrosion resistance. These clevis fork heads have an M8 tap size, a right-hand thread orientation, and a body width of 16 mm. They feature a plain design (no integral bearing) and are used in linkage assemblies where a clevis end is required for pin connections. The stainless steel construction makes them suitable for environments where moisture or chemicals are present. Ensure the thread direction and size match your application requirements.

Yes — 3G Electric (S) Pte. Ltd. supplies JW WINCO products. We stock the JW WINCO catalog and supply genuine factory-original products with full manufacturer warranty and technical support.