LABCONCO

Labconco ducted fume hoods, such as the Protector XStream series, are designed to protect the operator by exhausting hazardous fumes, vapors, and particulates outside the building through a duct system. They require connection to building exhaust and typically include a sash, interior liner, and airflow monitor. Labconco clean benches, such as the Nexus Horizontal series, provide a HEPA-filtered work area that protects the material or product from airborne contaminants by directing filtered air across the work surface. Clean benches do not exhaust to the outside and are not intended for operator protection from hazardous vapors. The choice depends on whether the application requires personnel protection, product protection, or both.

Labconco airflow monitors are available in several voltage configurations. Models such as the 3277618 and 3277608 airflow sensors operate on 120V AC and include mounting hardware and connecting cable. Other models, including the 9413401 and 9413301 monitors, operate on 208 to 230V AC and include an electrical power pack. Some 208–230V AC models also include a night setback feature that reduces airflow during unoccupied periods. Buyers should confirm the electrical supply available at the installation site and select the corresponding monitor model. All units are single-phase.

Yes. Labconco glassware washers include models designed specifically for narrow-mouthed glassware, such as the undercounter washer with a viewing window and touch-screen control. These units operate on single-phase 115V AC and include glassware holders. The undercounter format allows installation beneath a laboratory counter, with overall depth around 27 3/4 inches. Accessories and racks are available to accommodate different glassware types. Buyers should verify the interior dimensions and spindle configurations against the glassware being processed.

Labconco Protector XStream ducted fume hoods are available in multiple widths, including a 4 ft model with an overall depth of 37 3/4 inches. These hoods are supplied with pre-wired LED lighting and are typically ordered without a base stand, which must be specified separately. The white exterior finish is standard on some models. Larger widths are also available in the Protector line. Buyers should confirm the required sash opening, interior liner material, and exhaust volume for the specific application. Electrical requirements are single-phase.

Labconco Nexus horizontal clean benches are supplied with a blower, base/stand, and work surface. Some models also include UV lighting. They are available in assembled and unassembled configurations; unassembled units are shipped for site assembly. Overall widths range from approximately 39 3/8 inches to 8 3/8 feet, with a depth of 33 1/4 inches. The HEPA-filtered horizontal airflow pattern protects the work area from airborne particles. Buyers should verify the electrical requirements and available ceiling height for the selected model.

A Labconco airflow monitor with night setback, such as the 9413301 model, continuously verifies fume hood airflow and provides an alarm if airflow falls below a safe threshold. The night setback feature reduces airflow during unoccupied periods, which can lower energy consumption from the laboratory exhaust system. The monitor operates on 208 to 230V AC and includes an electrical power pack. It is constructed from plastic and has an overall width of 12 inches. Installation requires connection to the fume hood's airflow sensor and the building electrical supply. The setback function is typically activated by a timer or building automation signal.