precision_manufacturing

Machining & Tooling

Machining & tooling supplies — cutting tools, inserts, abrasives and workholding for precision metalworking, fabrication and production machining.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 10041 of 11571

Decimal-inch standard-wall headed gun drill bushing with 7/32 in inside diameter, 1 in outside diameter, and 1 in length under head. Inside diameter tolerance 0.0000 in / +0.0002 in; outside diameter tolerance +0.0000 in / -0.0002 in. Guides gun drills during deep-hole drilling operations to maintain hole alignment and reduce tool deflection.

BONEHAM

BONEHAM Decimal-Inch Standard-Wall Headed Gun Drill Bushing GDE6416.2272

BrandBONEHAM

Sign inAvailable

Class X Go (Plus) pin gauge with 0.3575 in diameter, inch type, and 0.00004 in tolerance. Used for precision dimensional inspection of hole minimum size limits in manufacturing and quality control. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.3575 in Diameter

BrandVERMONT GAGE

Sign inAvailable

This SDS-Plus drill bit is designed for concrete and masonry drilling applications. With a 1/2-inch diameter and 18-inch overall length, it provides a maximum drilling depth of 16 inches. Suitable for use with rotary hammer drills for tasks such as anchor installation and drilling into concrete, brick, or block.

WESTWARD

WESTWARD SDS-Plus Concrete & Masonry Drill Bit, 1/2 in, 18 in Overall Length

BrandWESTWARD

Sign inAvailable

This 7-piece set of standard built-in-pilot counterbores is made from cobalt for heat resistance. Used to create flat-bottomed recesses for socket-head cap screws in metalworking applications.

KEO

KEO 7-Piece Standard Built-in-Pilot Counterbore Set, Cobalt

BrandKEO

Sign inAvailable

Steel plug and pin gauge with black oxide finish, 0.9250 inch diameter, Class ZZ Go (Plus) tolerance of 0.00020 inches. Used for go/no-go inspection of inch-diameter holes in quality control and machining applications.

VERMONT GAGE

VERMONT GAGE Class ZZ Go (Plus) Plug & Pin Gauge - 0.9250 in, Black Oxide

BrandVERMONT GAGE

Sign inAvailable

Steel plug and pin gauge with black oxide finish, 0.1340 in diameter, Class ZZ no-go (minus) tolerance of 0.00020 in, and surface finish 10 microinch or better. Used for go/no-go inspection of machined holes and bores to verify that holes are not oversized beyond specified tolerance.

VERMONT GAGE

VERMONT GAGE Class ZZ No-Go (Minus) Plug & Pin Gauge: 0.1340 in Dia

BrandVERMONT GAGE

Sign inAvailable

PVD carbide replaceable drill tip designed for use with compatible modular drill bit holders. Enables quick tip changes without replacing the entire tool, reducing downtime in metalworking and machining applications.

KYOCERA

KYOCERA PVD Carbide Exchangeable Tip for Modular Drill Bits

BrandKYOCERA

Sign inAvailable

Steel plug and pin gauge with black oxide finish, 0.5130 inch diameter, Class ZZ Go (Plus) tolerance of 0.00020 inch. Used for precision hole measurement in machining and quality control, checking minimum acceptable hole size. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class ZZ Go (Plus) Plug & Pin Gauge, 0.5130 in, Black Oxide

BrandVERMONT GAGE

Sign inAvailable

Rectangular magnetic plate chuck with standard pole spacing, measuring 104 mm wide by 150 mm long. Designed for holding ferromagnetic workpieces during surface grinding, milling, or EDM operations. Provides reliable clamping force for precision workholding in toolroom and production environments.

SUBURBAN

SUBURBAN MRE-1018 Rectangular Magnetic Plate Chuck

BrandSUBURBAN

Sign inAvailable

This high-speed steel drill bit blank is precision ground to a #9 wire size diameter of 0.1960 inches with a tolerance of +0.0000/-0.0002 inches. It features a bright (uncoated) finish and an overall length of 3 5/8 inches. Commonly used in toolmaking and maintenance for creating custom drill bits or reamers.

VERMONT GAGE

VERMONT GAGE #9 Wire Size High-Speed Steel Drill Bit Blank

BrandVERMONT GAGE

Sign inAvailable

← Prev 1…10039 10040 10041 10042 10043…11571 Next →