precision_manufacturing

Machining & Tooling

Machining & tooling supplies — cutting tools, inserts, abrasives and workholding for precision metalworking, fabrication and production machining.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 11526 of 11571

This nonlocking indexing plunger features a pull-knob actuator for manual retraction, designed for quick positioning and temporary locking in thin-gauge sheet metal applications. Constructed from stainless steel with an M10x1 thread, it provides a nose force range of 5 N to 18 N. Suitable for use in jigs, fixtures, and machine guards where repeatable positioning is required.

JW WINCO

JW WINCO Nonlocking Pull-Knob Indexing Plunger for Thin-Gauge Sheet Metal

BrandJW WINCO

Sign inAvailable

CHICAGO-LATROBE

CHICAGO-LATROBE Spiral Point Tap: M6x1 Metric, D5 / 6H, 2 Flute, Bottoming Chamfer

BrandCHICAGO-LATROBE

Sign inAvailable

Class X No-Go (Minus) pin gauge, 0.1318 in diameter, 2 in length, uncoated steel, tolerance 0.00004 in. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the upper limit. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.1318 in

BrandVERMONT GAGE

Sign inAvailable

Square indexable milling insert for medium-duty face and shoulder milling. Suitable for steel and cast iron workpieces in general machining operations. Grade S40T with medium geometry (K-MM) for reliable cutting performance.

SANDVIK COROMANT

SANDVIK COROMANT R245-12 T3 K-MM S40T Square Indexable Milling Insert

BrandSANDVIK COROMANT

Sign inAvailable

Solid carbide square end mill with AlTiN coating for heat resistance and wear protection. Two-flute design for efficient chip evacuation. Suitable for slotting, profiling, and contouring in ferrous and non-ferrous metals. Mill diameter 13/64", length of cut 3/8", overall length 2".

OEM

OEM General Purpose Carbide Square End Mill

BrandOEM

Sign inAvailable

Indexable face mill for face milling operations on materials such as steel, stainless steel, and cast iron. Used in general-purpose machining applications where surface finish and productivity are required.

WIDIA

WIDIA 6020530 Indexable Face Mill

BrandWIDIA

Sign inAvailable

Class X Go (Plus) pin gauge with 0.6683 in diameter and 0.00004 in tolerance. Used to verify the minimum acceptable hole size in precision machining and inspection. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.6683 in

BrandVERMONT GAGE

Sign inAvailable

Diamond indexable turning insert available in DNMG332-MS3 and DNMG110408-MS3 geometries. Used for precision turning of non-ferrous materials, composites, and abrasive alloys in general machining applications.

WALTER

WALTER Diamond Indexable Turning Insert DNMG332-MS3 / DNMG110408-MS3

BrandWALTER

Sign inAvailable

Class X Go (Plus) pin gauge with 0.3721 in diameter and 0.00004 in tolerance. Used to verify the minimum acceptable hole size in precision machining and inspection. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.3721 in

BrandVERMONT GAGE

Sign inAvailable

This Class X No-Go (minus) pin gauge is used to verify that a machined hole does not exceed its maximum allowable size. With a diameter of 0.8247 in and a tolerance of 0.00004 in, it is made of uncoated steel and includes a Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge

BrandVERMONT GAGE

Sign inAvailable

← Prev 1…11524 11525 11526 11527 11528…11571 Next →