Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

precision_manufacturing

Machining & Tooling

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 2162 of 2411

APPROVED VENDOR Chucking Reamer Set: 29 Pc, 1/16 in to 1/2 in Dia, Straight Flute (MPN 11V301). Key specifications — attr1301902: APPROVED VENDOR.

OEM Chucking Reamer Set: 29 Pc

BrandOEM

Sign inAvailable

Point SV120 Hardslick Super Cobalt SV Point: High Speed Steel, Hardslick, 3 13/32 in Hole Dia. (MPN SV120326)

YG-1 TOOL Point SV120 Hardslick Super Cobalt SV Point: High Speed Steel, Hardslick

BrandYG-1 TOOL

Sign inAvailable

JET Floor Drill Press: Belt Drive, Fixed Speed, 150 RPM – 4,200 RPM, 115/230V AC /Single-Phase (MPN 354170). Key specifications — attr22849: 150 to 4,200 RPM; attr22858: 115/230V AC; attr73523: Drilling; attr22856: Belt; attr73570: Single-Phase; attr22850: 10 in; attr22846: 1-1/2 hp; attr22840: 18/9 A.

JET Floor Drill Press: Belt Drive, Fixed Speed, 150 RPM – 4,200 RPM

BrandJET

Sign inAvailable

NOGA Arm Only: Arm Only, Articulating Arm, Non-Magnetic Base, 178 mm Max Reach (MPN NF60103). Key specifications — attr1184043: NOGA; attr1200946: Arm Only; attr1184025: Fine Adjust Top (FAT); attr1184013: NF60103; attr1184022: Non-Magnetic; attr1184027: external M5 thread; attr1184030: M5.

NOGA Arm Only: Arm Only, Articulating Arm, Non-Magnetic Base

BrandNOGA

Sign inAvailable

VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.4872 in Dia, 0.00004 in Tolerance (MPN 141148720). Key specifications — attr1182443: 0.4872 in; attr1182450: 0.00004 in; attr1182451: Certificate of Accuracy with NIST Traceability; attr1182457: VERMONT GAGE; attr1182447: Uncoated Steel.

VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.4872 in Dia

BrandVERMONT GAGE

Sign inAvailable

INSIZE Back Jaw Centerline Digital Caliper: 0.4000 in to 12 in /10 mm to 300 mm, Cabled, Back Jaw (MPN 1177-300). Key specifications — attr1184461: +/- 0.040 in; attr1184462: 0.0005 in; attr1184471: Outside; attr1184472: Back Jaw; attr1184496: INSIZE.

INSIZE Back Jaw Centerline Digital Caliper: 0.4000 in to 12 in /10 mm to 300 mm, Cabled

BrandINSIZE

Sign inAvailable

KEO Standard Keyseat Cutter: Carbide Tipped, Straight Tooth, 1-1/4" Dia, 1/4" Thick, ANSI # 810 (MPN 943-000-770). Key specifications — attr1164153: 810.

KEO Standard Keyseat Cutter: Carbide Tipped, Straight Tooth, 1-1/4" Dia, 1/4" Thick

BrandKEO

Sign inAvailable

VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.9704 in Dia, 0.00006 in Tolerance (MPN 141197040). Key specifications — attr1182443: 0.9704 in; attr1182450: 0.00006 in; attr1182451: Certificate of Accuracy with NIST Traceability; attr1182457: VERMONT GAGE; attr1182447: Uncoated Steel.

VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.9704 in Dia

BrandVERMONT GAGE

Sign inAvailable

SUMITOMO Triangle Turning Insert: TPGT631RFX, TPGT080204R-FX (MPN TPGT631RFX-AC5025S). Key specifications — attr257938: TPGT631RFX; attr257939: TPGT080204R-FX.

SUMITOMO Triangle Turning Insert: TPGT631RFX

BrandSUMITOMO

Sign inAvailable

ROCKY MOUNTAIN TWIST Threaded Shank Drill Bit: #24, 9/16" Overall Lg, Black Oxide HSS (MPN 953HS24ST). Key specifications — attr1235676: ROCKY MOUNTAIN TWIST; attr1235682: 1/4"-28; attr1235677: 0.1520; attr1235683: NAS 965 Type B.

ROCKY MOUNTAIN TWIST

ROCKY MOUNTAIN TWIST Threaded Shank Drill Bit: #24, 9/16" Overall Lg

BrandROCKY MOUNTAIN TWIST

Sign inAvailable

WIDIA Parallelogram Milling Insert: XDPT1708SRMM, XDPT170432PESRMM (MPN 5988206)

WIDIA Parallelogram Milling Insert: XDPT1708SRMM, XDPT170432PESRMM (MPN 5988206)

BrandWIDIA

Sign inAvailable

VERMONT GAGE Class X No-Go Pin Gauge: 0.8155 in Dia, 0.00004 in Tolerance, 2 in, Uncoated Steel (MPN 141281550). Key specifications — attr1182420: Certificate of Accuracy with NIST Traceability; attr1182436: VERMONT GAGE; attr1182424: 0.8155 in; attr1182429: Uncoated Steel; attr1182423: 0.00004 in.

VERMONT GAGE Class X No-Go Pin Gauge: 0.8155 in Dia, 0.00004 in Tolerance, 2 in

BrandVERMONT GAGE

Sign inAvailable

KEO Dovetail Cutter: Carbide Tipped, 60°, 3/4" Cut Dia, 1/4" Cut Wd, 3 Tooth (MPN 929-000-064)

KEO Dovetail Cutter: Carbide Tipped, 60°, 3/4" Cut Dia, 1/4" Cut Wd, 3 Tooth (MPN 929-000-064)

BrandKEO

Sign inAvailable

OSG Spiral Point Tap: 1/4"-20 UNC, H2 / 2B-3B, 3 Flute, Plug Chamfer (MPN 1736608). Key specifications — attr1299616: H2 / 2B-3B.

OSG Spiral Point Tap: 1/4"-20 UNC, H2 / 2B-3B, 3 Flute

BrandOSG

Sign inAvailable

YG-1 Roughing End Mill: Cobalt, TiN Coated, 4 Flute, 3/4" Mill Dia, 1-5/8" LOC, 3-3/4" OAL (MPN 73358CN)

YG-1 Roughing End Mill: Cobalt, TiN Coated, 4 Flute, 3/4" Mill Dia, 1-5/8" LOC

BrandYG-1

Sign inAvailable

WIDIA HANITA Square End Mill: Carbide, TiAlN Coated, 4 Flute, 1 mm Mill Dia, 4 mm LOC, 38 mm OAL (MPN 40040100T004)

WIDIA HANITA Square End Mill: Carbide, TiAlN Coated, 4 Flute, 1 mm Mill Dia, 4 mm LOC

BrandWIDIA HANITA

Sign inAvailable

DORIAN Knurling Holder: 1/2 in Shank Wd, 2 3/4 in Shank Lg, 3 3/8 in Overall Lg, 2 Knurls Required (MPN SFKT-50-2)

DORIAN Knurling Holder: 1/2 in Shank Wd, 2 3/4 in Shank Lg, 3 3/8 in Overall Lg

BrandDORIAN

Sign inAvailable

OSG Square End Mill: Carbide, EXO Coated, 5 Flute, 1/4" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN VGM5-0057)

OSG Square End Mill: Carbide, EXO Coated, 5 Flute, 1/4" Mill Dia, 3/4" LOC

BrandOSG

Sign inAvailable

APPROVED VENDOR Square End Mill: Carbide, ZrN Coated, 3 Flute, 1/4" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 273-250750D)

OEM Square End Mill: Carbide

BrandOEM

Sign inAvailable

JW WINCO Indexing Plunger Latch Mechanisms with Knob: 5 mm Plunger Wd

BrandJW WINCO

Sign inAvailable

KYOCERA Turning Insert: WPMT322HQ CA515, WPMT160308HQ. Key specifications — attr257986: WPMT160308HQ; attr257985: WPMT322HQ CA515.

KYOCERA Turning Insert: WPMT322HQ CA515

BrandKYOCERA

Sign inAvailable

WIDIA Indexable Thread Turning Tool Holder (MPN 6766069)

WIDIA Indexable Thread Turning Tool Holder (MPN 6766069)

BrandWIDIA

Sign inAvailable

TECHNIKS Collet: ER16, 5/16 in (MPN 04216-5/16). Key specifications — attr1033353: 04216-5/16; attr1033354: TECHNIKS.

TECHNIKS Collet: ER16

BrandTECHNIKS

Sign inAvailable

CLEVELAND Ball End Mill: Carbide, 4 Flute, 3/8" Mill Dia, 1-1/8" LOC, 3" OAL (MPN C63550)

CLEVELAND Ball End Mill: Carbide, 4 Flute, 3/8" Mill Dia, 1-1/8" LOC, 3" OAL (MPN C63550)

BrandCLEVELAND

Sign inAvailable

OSG Ball End Mill: Carbide, 4 Flute, 3/8" Mill Dia, 1-3/4" LOC, 4" OAL (MPN 484-3750-BN)

OSG Ball End Mill: Carbide, 4 Flute, 3/8" Mill Dia, 1-3/4" LOC, 4" OAL (MPN 484-3750-BN)

BrandOSG

Sign inAvailable

MICRO 100 Grooving Tool: 0.1875 in Shank Dia., Right Hand, 1.500 in Overall Lg (MPN QRR-020-8X)

MICRO 100 Grooving Tool: 0.1875 in Shank Dia., Right Hand

BrandMICRO

Sign inAvailable

DORIAN Knurling Holder: 2 Knurls Required, CNCKH, 2 Head Ht, 1 7/8 in Head Lg, 1.5260 in Head Wd (MPN CNCKH-6-4)

DORIAN Knurling Holder: 2 Knurls Required, CNCKH, 2 Head Ht, 1 7/8 in Head Lg

BrandDORIAN

Sign inAvailable

SUBURBAN Angle Plate: Cast Iron, 10 in L x 8 in W x 6 in H, 0.0005 in Square & Parallel

BrandSUBURBAN

Sign inAvailable

KIPP Indexing Plunger: Nonlocking, SS, 5/8"-11 Thread

BrandKIPP

Sign inAvailable

MICRO 100 Boring Bar: Boring, 5/16 in Shank Dia., Bright (Uncoated), 0.1340 in Center to Cutting Tip (MPN BB-2901000S)

MICRO 100 Boring Bar: Boring, 5/16 in Shank Dia., Bright (Uncoated)

BrandMICRO

Sign inAvailable

YG-1 Ball End Mill: Cobalt, 4 Flute, 2" Mill Dia, 2" LOC, 4-1/2" OAL (MPN 43477)

YG-1 Ball End Mill: Cobalt, 4 Flute, 2" Mill Dia, 2" LOC, 4-1/2" OAL (MPN 43477)

BrandYG-1

Sign inAvailable

STARRETT Pin Vise: Pin Vise, 3.2 mm Max Size - mm, 0.05 in Min Size - Inch, PVC Coated Grip, Octagon (MPN 166C). Key specifications — attr1181472: PVC Coated; attr1181473: Octagon; attr1181474: 3.65 in; attr1181475: No; attr1181485: STARRETT.

STARRETT Pin Vise: Pin Vise, 3.2 mm Max Size - mm, 0.05 in Min Size - Inch, PVC Coated Grip

BrandSTARRETT

Sign inAvailable

WIDIA Indexable Face Mill: VSM11D250Z06S075XD11 (MPN 5416395). Key specifications — attr256955: VSM11D250Z06S075XD11.

WIDIA Indexable Face Mill: VSM11D250Z06S075XD11 (MPN 5416395)

BrandWIDIA

Sign inAvailable

APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 3/4" Mill Dia, 4" LOC, 7" OAL (MPN 313496)

OEM Square End Mill: Carbide

BrandOEM

Sign inAvailable

CLEVELAND Square End Mill: Carbide, 4 Flute, 1/16" Mill Dia, 3/16" LOC, 1-1/2" OAL (MPN C76076)

CLEVELAND Square End Mill: Carbide, 4 Flute, 1/16" Mill Dia, 3/16" LOC, 1-1/2" OAL (MPN C76076)

BrandCLEVELAND

Sign inAvailable

SUPER TOOL Chucking Reamer: 0.5085 in Dia, Straight Flute, Carbide-Tipped (MPN 56555085). Key specifications — attr1301579: SUPER TOOL.

SUPER TOOL Chucking Reamer: 0.5085 in Dia, Straight Flute

BrandSUPER TOOL

Sign inAvailable

TECHNIKS Collet: DA180, 11/32 in (MPN 01618-11/32). Key specifications — attr1033633: 01618-11/32; attr1033634: TECHNIKS.

TECHNIKS Collet: DA180

BrandTECHNIKS

Sign inAvailable

OSG Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 11/16" Mill Dia, 1-3/8" LOC, 4" OAL (MPN HP441-6875-BN)

OSG Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 11/16" Mill Dia, 1-3/8" LOC

BrandOSG

Sign inAvailable

APPROVED VENDOR Screw Machine Drill Bit: Letter O, AltiN-Coated Carbide, 135° 4-Facet Point (MPN 460-203160B). Key specifications — attr1233532: 0.3160.

OEM Screw Machine Drill Bit: Letter O

BrandOEM

Sign inAvailable

YG-1 Ball End Mill: Cobalt, TiCN Coated, 2 Flute, 1-1/8" Mill Dia, 2-1/4" LOC, 4-3/4" OAL (MPN 41435CC)

YG-1 Ball End Mill: Cobalt, TiCN Coated, 2 Flute, 1-1/8" Mill Dia, 2-1/4" LOC

BrandYG-1

Sign inAvailable

WALTER Indexable Slitting Cutter: F4153.UBN19.076.Z04.06R (MPN 5677473). Key specifications — attr257007: F4153.UBN19.076.Z04.06R.

WALTER Indexable Slitting Cutter: F4153.UBN19.076.Z04.06R (MPN 5677473)

BrandWALTER

Sign inAvailable

HOLEMAKER TECHNOLOGY Multisink Pilot: High Speed Steel (MPN 601051-0010). Key specifications — attr1372604: 9/16 in; attr1301035: HOLEMAKER TECHNOLOGY.

HOLEMAKER TECHNOLOGY

HOLEMAKER TECHNOLOGY Multisink Pilot: High Speed Steel (MPN 601051-0010)

BrandHOLEMAKER TECHNOLOGY

Sign inAvailable

OSG Spiral Flute Tap: M3.5x0.35 Metric, D3 / 4H-6H, 3 Flute, Modified Bottoming Chamfer (MPN 1650004208). Key specifications — attr1299826: D3 / 4H-6H.

OSG Spiral Flute Tap: M3.5x0.35 Metric, D3 / 4H-6H, 3 Flute

BrandOSG

Sign inAvailable

WIDIA Diamond Turning Insert: CCMT4321P, CCMT1204081P (MPN 4166562). Key specifications — attr257732: CCMT4321P; attr257733: CCMT1204081P.

WIDIA Diamond Turning Insert: CCMT4321P

BrandWIDIA

Sign inAvailable

CLEVELAND Counterbore For Interchangeable Pilot: 3/16 in Bore Dia

BrandCLEVELAND

Sign inAvailable

SUMITOMO Diamond Turning Insert: CNMG643EME, CNMG190612N-ME (MPN CNMG643EME-AC810P). Key specifications — attr257732: CNMG643EME; attr257733: CNMG190612N-ME.

SUMITOMO Diamond Turning Insert: CNMG643EME

BrandSUMITOMO

Sign inAvailable

VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.2604 in Dia, 0.00004 in Tolerance (MPN 141126040). Key specifications — attr1182443: 0.2604 in; attr1182450: 0.00004 in; attr1182451: Certificate of Accuracy with NIST Traceability; attr1182457: VERMONT GAGE; attr1182447: Uncoated Steel.

VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.2604 in Dia

BrandVERMONT GAGE

Sign inAvailable

CLE-LINE Taper Shank Drill Bit: 29 mm, 118° Point, Black Oxide HSS, MT3 Shank (MPN C21969). Key specifications — attr1235339: MT3; attr1235323: 1.1417.

CLE-LINE Taper Shank Drill Bit: 29 mm, 118° Point, Black Oxide HSS

BrandCLE-LINE

Sign inAvailable

← Prev 1…2160 2161 2162 2163 2164…2411 Next →