precision_manufacturing

Machining & Tooling

Machining & tooling supplies — cutting tools, inserts, abrasives and workholding for precision metalworking, fabrication and production machining.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 297 of 11571

This chucking reamer is designed for precision hole finishing in industrial machining operations. It enlarges and smooths existing holes to tight tolerances, commonly used in metalworking. The carbide-tipped construction provides wear resistance for extended tool life. Straight flute design facilitates chip evacuation.

SUPER TOOL

SUPER TOOL Straight-Flute Carbide-Tipped Chucking Reamer 0.662 in Dia

BrandSUPER TOOL

Sign inAvailable

This carbide square end mill features an AlTiN coating and a 5-flute design for fast cutting in steel and cast iron. With a 5/8" mill diameter, 2-1/8" length of cut, and 4-1/2" overall length, it is suited for roughing and finishing operations in general machining applications.

WIDIA HANITA

WIDIA HANITA Fast-Cutting Carbide Square End Mill for Steel & Cast Iron

BrandWIDIA HANITA

Sign inAvailable

Class X Go (Plus) pin gauge with 0.9018 in diameter, inch type, and 0.00006 in tolerance. Used for verifying minimum hole dimensions in manufacturing quality control. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.9018 in

BrandVERMONT GAGE

Sign inAvailable

Class X No-Go (minus) pin gauge with 0.1477 in diameter, 2 in length, uncoated steel, and ±0.00004 in tolerance. Used to verify that a hole does not exceed its upper size limit; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.1477 in

BrandVERMONT GAGE

Sign inAvailable

Chisel bit for SDS-Max hammer drills with a 4 in head width and 4 in overall length. Features a 45/64 in shank diameter and 45/64 in hex shank. Used for chiseling tile, mortar, and thin-set in demolition and renovation applications.

DEWALT

DEWALT DW5848B SDS-Max Chisel Bit, 4 in Head Width, 45/64 in Hex Shank

BrandDEWALT

Sign inAvailable

Class ZZ No-Go (Minus) plug and pin gauge for dimensional verification of inch-diameter holes. Made from uncoated tool steel with a 0.00020 in tolerance. Used in go/no-go inspection to ensure holes do not exceed maximum allowable size.

VERMONT GAGE

VERMONT GAGE Class ZZ No-Go (Minus) Plug & Pin Gauge

BrandVERMONT GAGE

Sign inAvailable

Wire and cable installer drill bit for pulling wire or cable through metal and plastic studs. Features a split-point tip for reduced walking on contact. 1/4-inch diameter, 54-inch overall length allows drilling through multiple studs in one pass.

EAGLE TOOL US

EAGLE TOOL US Cable Installer Drill Bit, 1/4 in x 54 in, Split Point

BrandEAGLE TOOL US

Sign inAvailable

This general purpose carbide square end mill features a TiN coating for reduced friction and extended tool life. With 4 flutes, a 1/16" cutting diameter, 3/16" length of cut, and 1-1/2" overall length, it is suitable for milling slots, profiling, and contouring in metals and plastics.

YG-1

YG-1 General Purpose Carbide Square End Mill

BrandYG-1

Sign inAvailable

YANKEE

YANKEE 435-12.5MM Spiral-Flute High-Speed Steel Chucking Reamer

BrandYANKEE

Sign inAvailable

WIDIA

WIDIA Indexable Thread Turning Toolholder 3632124

BrandWIDIA

Sign inAvailable

← Prev 1…295 296 297 298 299…11571 Next →