precision_manufacturing

Machining & Tooling

Machining & tooling supplies — cutting tools, inserts, abrasives and workholding for precision metalworking, fabrication and production machining.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 9583 of 11571

This triangle (T) indexable turning insert is made of PVD carbide, designed for finish turning operations on steel and stainless steel. It provides sharp cutting edges and reliable chip control in lathe applications across general machining.

KYOCERA

KYOCERA TCGT2202FRUPR930 Triangle (T) Indexable Turning Insert, PVD Carbide

BrandKYOCERA

Sign inAvailable

This plug-style coolant collet is designed for ER40 toolholders with an 8 mm bore. It delivers coolant directly to the cutting tool interface during machining operations such as milling, drilling, and turning, helping to reduce heat and flush chips from the cutting zone.

TECHNIKS

TECHNIKS Plug-Style ER Coolant Collet, ER40, 8 mm Bore

BrandTECHNIKS

Sign inAvailable

Headless keyway broach bushing with 2-1/2 in size and 6 in overall length. Fractional inch measurement system, decimal equivalent 2.5000. Guides broach tools for cutting keyways in shafts or hubs during machining operations.

HASSAY SAVAGE

HASSAY SAVAGE Keyway Broach Bushing, Headless, 2-1/2 in, 6 in Overall Length

BrandHASSAY SAVAGE

Sign inAvailable

Exchangeable tip for modular drill bits, type TDMX, with a diameter of 26.50 mm. Designed for high-performance drilling in metalworking and machining applications, providing precise cutting geometry and wear resistance for consistent hole quality in industrial manufacturing.

WIDIA

WIDIA TDMX Insert FPE D 26.50mm

BrandWIDIA

Sign inAvailable

Triangle (T) indexable turning insert for general turning, facing, and profiling operations on lathes. Designated as TPG321 and TPGN160304. Used in metalworking applications requiring repeatable cutting geometry and edge positioning.

SUMITOMO

SUMITOMO TPG321-T1500A Triangle Indexable Turning Insert

BrandSUMITOMO

Sign inAvailable

Class X Go (Plus) pin gauge with 0.8227-inch diameter, inch type, and 0.00004-inch tolerance. Used for precision hole inspection to verify that hole diameters are within lower tolerance limits. Suitable for quality control in manufacturing and machining applications.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.8227 in

BrandVERMONT GAGE

Sign inAvailable

CLEVELAND

CLEVELAND Straight Flute Tap: 1/4"-28 UNF, H3 / 2B, 4 Flute, Plug Chamfer, LH

BrandCLEVELAND

Sign inAvailable

Brazed-tip lathe tool bit with carbide cutting tip and zinc shank. Shank height 3/8 in, shank width 3/8 in. Used for single-point turning, boring, grooving, and profiling on lathes.

MICRO

MICRO RAD-8 Brazed-Tip Lathe Tool Bit

BrandMICRO

Sign inAvailable

Class X No-Go pin gauge with 0.6526 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used to verify that a hole does not exceed its maximum allowable size; if the gauge enters, the hole is oversized. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge 0.6526 in Dia

BrandVERMONT GAGE

Sign inAvailable

Dayton

Dayton Quick-Release Drill Press Vise

BrandDayton

Sign inAvailable

← Prev 1…9581 9582 9583 9584 9585…11571 Next →