MASTER

MASTER direct-fired torpedo heaters are commonly CSA certified to operate on kerosene, #1 and #2 diesel fuel, JP8/Jet A fuel, and #1 and #2 fuel oil. Specific models may have different approvals, so the datasheet for the exact SKU should be checked. For example, the 140TMHD-KFA is listed as CSA certified for kerosene, #1 and #2 diesel, JP8/Jet A, and #1 and #2 fuel oil. Fuel selection affects combustion cleanliness, odor, and maintenance intervals. Kerosene typically burns cleaner than diesel, but diesel is often more available on construction sites. Buyers should confirm the fuel specification against the heater's nameplate and the site's fuel supply before ordering.

MASTER portable torpedo heaters in the 3G Electric catalog cover heating areas from approximately 2,000 sq ft to 5,500 sq ft. Handheld models such as the MH-80TBOA-KFA and MH-80TBOA-OFR are rated for 2,000 sq ft. Wheeled models include the 140TMHD-KFA at 3,500 sq ft, the 190TMHD-KFA at 4,300 sq ft, and the MH-220T-SDR at 5,500 sq ft. Heating-area ratings are typically based on typical conditions and may vary with insulation, ceiling height, and ambient temperature. For larger spaces, multiple units may be required. The physical dimensions and mounting type also differ between handheld and wheeled models, which affects placement and maneuverability.

The MASTER battery connection kit (SKU ASM-00040, MPN ASM-00040) enables cordless operation of compatible MASTER portable gas heaters by connecting a Milwaukee® battery. It has an overall height of 1 inch and an overall width of 3 inches. This accessory is relevant where electrical outlets are unavailable or inconvenient, such as remote job sites or temporary heating setups. The kit is specific to Milwaukee® batteries, so users should confirm battery compatibility and voltage before purchase. It is not a universal adapter. For maintenance managers, the kit reduces dependence on extension cords and generators for heater operation, provided the heater model supports battery connection.

MASTER wedge door holders are accessories used to hold doors open in commercial and industrial settings during maintenance, material handling, or facility operations. The catalog includes the GD002, a gray rubber wedge measuring 4 3/4 in long, 2 1/4 in wide, and 1 1/4 in overall height, and the GD005, a yellow wedge measuring 6 3/4 in long, 3 1/2 in wide, and 2 in overall height. These are simple mechanical devices with no electrical or pneumatic requirements. They are typically used where doors must remain open for ventilation, equipment movement, or personnel access. The wide flange on the GD002 is noted as a feature. Buyers should match wedge size and material to door weight and floor surface.

MASTER direct-fired portable torpedo heaters are typically intended for temporary heating in construction, industrial, and agricultural spaces. Direct-fired heaters release combustion products into the heated space, so ventilation requirements apply. They are not sealed-combustion appliances. Users should follow the manufacturer's instructions regarding clearance, ventilation, and fuel handling. Some models include safety over-heat shut-off systems, such as the MH-80TBOA-OFR. For enclosed occupied spaces, alternative heater types may be required. The datasheet and nameplate provide the specific safety and application information for each model. 3G Electric supplies the documentation needed to verify these requirements before purchase.

3G Electric supplies MASTER HVACR parts and portable heaters as part of its industrial-equipment catalog, with 58 MASTER SKUs listed. Support includes part-number-level identification, datasheets, and logistics coordination for global delivery. For procurement specialists, this means the ability to request quotes against specific MPNs such as MH-80TBOA-KFA, 140TMHD-KFA, or ASM-00040. 3G Electric interprets demand for OEM parts and sources them accordingly, which is relevant when a maintenance team needs a replacement or a standardized accessory across multiple sites. The catalog includes heaters, battery kits, and door wedges. Buyers should provide the exact MPN or SKU when requesting a quote to avoid mismatches.