MITEE-BITE PRODUCTS INC

Mitee-Bite T-slot hex-edge fixture clamp kits are available for a range of T-slot widths. Metric sizes include 8 mm, 10 mm, 11 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, and 22 mm. Inch sizes include 3/8 in and 11/16 in. Each kit is designed to match the specific T-slot width of the machine table. The clamp kit includes the necessary components to secure workpieces. When selecting a kit, verify the T-slot width of your machine table to ensure proper fit. 3G Electric stocks multiple SKUs to cover common metric and inch T-slot sizes.

The T-slot hex-edge fixture clamp kits from Mitee-Bite are constructed with brass components. The brass material provides corrosion resistance and a smooth face that helps prevent marring of workpiece surfaces during clamping. The smooth face is particularly beneficial when holding finished or polished parts. The clamps are designed for use in milling, drilling, and other machining operations where secure holding without surface damage is required. The brass construction also offers good wear resistance for repeated use. For specific material certifications or alternative materials, consult the product specifications or contact 3G Electric for assistance.

Mitee-Bite inside-diameter (ID) clamps are designed to grip a workpiece from the inside of a bore or cavity. They expand against the internal surface to hold the part securely. This allows the outside of the workpiece to be machined without obstruction from traditional outside-diameter clamps. ID clamps are often used for turning, milling, and inspection operations where full access to the exterior is needed. They are available in various sizes to accommodate different bore diameters. The clamping mechanism is mechanical and typically actuated with a hex key or wrench. 3G Electric supplies a range of Mitee-Bite ID clamps to suit different workpiece sizes and configurations.

Mitee-Bite locating rails are used to position and align workpieces on machine tables or fixture plates. They provide a straight edge or reference surface that the workpiece can be pushed against for repeatable location. Locating rails are often used in conjunction with clamps to secure the part after positioning. They can be mounted directly to T-slots or fixture plates. The rails are available in various lengths and profiles to match different machine table configurations. Using locating rails helps reduce setup time and improve part-to-part consistency. 3G Electric stocks Mitee-Bite locating rails for common machine table sizes.

Yes, Mitee-Bite offers fixture clamps designed for both metric and inch T-slot dimensions. The T-slot hex-edge fixture clamp kits are available in metric sizes such as 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, and 22 mm, as well as inch sizes including 3/8 in and 11/16 in. This allows the clamps to be used on a wide range of machine tables regardless of the measurement system. When ordering, specify the T-slot width to ensure the correct kit is supplied. 3G Electric can assist in identifying the appropriate clamp for your machine table.

The hex-edge design on Mitee-Bite T-slot clamps allows the clamp to be tightened using a standard hex key. This provides a simple and reliable method for securing the clamp without specialized tools. The hex edge is integrated into the clamp body, so there are no loose parts to lose. The design also allows the clamp to be tightened from the side or top, depending on access. The low profile of the clamp keeps it below the cutting path in many setups, reducing interference with tooling. This makes the hex-edge clamp suitable for milling, drilling, and other operations where clearance is limited.