Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

water_drop

Plumbing

Industrial plumbing supplies — pipes, valves, fittings, pumps and fluid-handling components for process, utility and facility systems.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 253 of 2721

This ductile iron pneumatic butterfly valve is configured for air-to-air actuation with a lug-style body. It is suited for general service in HVAC, wastewater, and water media applications. The valve does not include a pilot solenoid voltage component.

ABZ VALVES Ductile Iron General-Service Pneumatic Butterfly Valve

BrandABZ VALVES

Sign inAvailable

This ASME Section XIII hot water pressure relief valve features a cast iron body with FNPTF x FNPTF connections in 1-1/4 in x 1-1/2 in sizes. Rated for a maximum operating pressure of 75 psi, it is used in hydronic systems to protect boilers, water heaters, and storage tanks from overpressure by automatically releasing water when the set pressure is exceeded.

Watts 1-1/4 740 075 FS ASME Section XIII Hot Water Pressure Relief Valve

BrandWatts

Sign inAvailable

This single throw limit control/thermostat is designed for electric water heaters, providing temperature regulation within a range of 110°F to 160°F. Rated at 3,600 W at 120V, it serves as a safety device to limit water temperature and prevent overheating in residential and light commercial water heater applications.

OEM Single Throw Limit Control/Thermostat, 110°F to 160°F, 3,600 W @ 120V

BrandOEM

Sign inAvailable

This HANSEN plug valve is a 2-way inline brass valve with female compression connections for 5/16 in pipe. It is used for on/off control of fluids in low-pressure piping systems, such as water, oil, and gas lines.

HANSEN 2-Way Inline Brass Plug Valve, 5/16 in, Female Compression

BrandHANSEN

Sign inAvailable

A weld plate used in plumbing systems for attaching components or providing a mounting surface. Suitable for general plumbing applications where a welded connection is required.

ZSI TP4 Weld Plate

BrandZSI

Sign inAvailable

Brass inline needle valve with integral bonnet and V-stem for precise flow regulation of water. Features 1/8 in pipe size and compression connections on both ends. Complies with ISA S75.02 standards. Suitable for throttling and shut-off in hydraulic and pneumatic circuits.

Parker 2A-V4LR-B Brass Straight-Body Needle Valve

BrandParker

Sign inAvailable

Lever-acting gas pressure regulator with an aluminum body and NPT x NPT connections. Rated for 2,012,500 BtuH gas capacity. Used in commercial and industrial gas systems to reduce and stabilize inlet gas pressure for burners, boilers, and furnaces.

MAXITROL 325-7AL-1010-NG02 Lever-Acting Gas Pressure Regulator

BrandMAXITROL

Sign inAvailable

String-wound water filter cartridge with 10-micron rating, constructed from cotton media. Rated for 15 gpm flow and 30-inch overall height. Suitable for sediment filtration in water systems, including process water, cooling towers, and pre-treatment applications.

OEM APPROVED VENDOR String Wound Water Filter Cartridge

BrandOEM

Sign inAvailable

This APOLLO ball valve is a 3/4 in brass, straight pattern, full port valve with press x press connections and a lever handle. It is used for on/off flow control in plumbing and HVAC systems, providing minimal pressure drop due to its full port design.

APOLLO 77W10401A 3/4 in Brass Full Port Ball Valve, Press x Press, Lever Handle

BrandAPOLLO

Sign inAvailable

No image available

ZURN ZN415-3NH-5SZ1-DP General Purpose Floor Drain

BrandZURN

Sign inAvailable

← Prev 1…251 252 253 254 255…2721 Next →