Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1126 of 4547

This general purpose clamp-on beam shaft coupling accommodates up to 3° angular misalignment. It features a round body, metric sizing, and a 10 mm bore diameter 1. Suitable for motion control applications including precision positioning and light-duty power transmission.

RULAND MANUFACTURING

RULAND MANUFACTURING FCMR25-10-7-SS General Purpose Clamp-On Beam Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

This finished bore close-coupled flange is designed for connecting rotating shafts in power transmission systems such as pumps, compressors, and gearboxes. It features a round keyed metric bore and a cast iron construction. Maximum speed is 3,600 RPM with an outside diameter of 8 5/8 in.

MASTERDRIVE 11S-60MM Finished Bore Close-Coupled Flange

BrandMASTERDRIVE

Sign inAvailable

Curvilinear HTD section timing belt with 8 mm pitch and 50 mm top width. Suitable for synchronous power transmission in industrial machinery such as conveyors, packaging equipment, and machine tools.

BANDO Synchro-Link® HT Timing Belt 1064-8M-50

BrandBANDO

Sign inAvailable

Inch-system tapered roller bearing cone made from carbon steel. Bore 1 13/32 in, outside diameter 2.32 in, cone width 1 in. Designed for use with compatible cup HM88610. Supports radial and axial loads in applications such as gearboxes and industrial machinery.

NTN HM88648 Tapered Roller Bearing Cone, 1 13/32 in Bore, 2.32 in OD, 1 in Width

BrandNTN

Sign inAvailable

One-piece acetal plastic shaft collar with set screw for securing components on shafts. Bore diameter 7/8 in, outside diameter 1 3/8 in. Suitable for applications requiring corrosion resistance and low friction, such as food processing, packaging, and material handling.

Dayton Plastic Shaft Collar, Set Screw, Acetal, 7/8 in Bore, 1 3/8 in OD

BrandDayton

Sign inAvailable

Inch-system tapered roller bearing assembly with a 3 1/2 in bore, 7 1/2 in OD, and 2.265 in cone width. Constructed with a carbon steel ring and pressed steel cage. Used in applications requiring support of combined radial and axial loads, such as gearboxes, conveyors, and wheel hubs.

NTN 855/854 Tapered Roller Bearing Assembly, 3 1/2 in Bore, 7 1/2 in OD

BrandNTN

Sign inAvailable

This dual-lip oil seal features a rubber-enclosed case designed for rough bores. It is spring-loaded and made of nitrile material. With a 68 mm inner diameter, 90 mm outer diameter, and 10 mm width, it handles a maximum pressure of 7 psi. Suitable for rotating shafts in equipment such as pumps, gearboxes, and motors to retain lubricants and exclude contaminants.

DDS 689010TF Dual-Lip Oil Seal with Rubber-Enclosed Case for Rough Bores

BrandDDS

Sign inAvailable

No image available

Dayton Twisted O-Ring Round Belt, Clear, 1/4 in Dia, 13 in Overall Length, 85A

BrandDayton

Sign inAvailable

The DUFF-NORTON LT225-1-50P is a linear actuator with a 225 lbf rated load and 2-inch stroke, powered by 12V DC. It features a plastic nut and includes a potentiometer for position feedback. With an IP66 rating, it is suitable for outdoor or washdown environments. Typical applications include industrial automation, material handling, and solar tracking where precise linear motion control is required.

DUFF-NORTON LT225-1-50P Linear Actuator

BrandDUFF-NORTON

Sign inAvailable

Sprag-type clutch with 40 mm bore and 405.7 ft-lb static torque rating. Designed for overrunning, indexing, and backstopping applications in industrial power transmission systems. Ball bearing supported for reliable torque control.

GMN FND 470-M Sprag Clutch, 40 mm Bore, 405.7 ft-lb Static Torque

BrandGMN

Sign inAvailable

← Prev 1…1124 1125 1126 1127 1128…4547 Next →