Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1369 of 4547

Metric bearing locknut with a face diameter of 5 1/4 inches. Used to secure bearings onto shafts, preventing axial movement and maintaining proper preload in industrial machinery such as conveyors, pumps, and gearboxes.

STANDARD LOCKNUT

STANDARD LOCKNUT KM22 Bearing Locknut, Metric, 5 1/4 in Face Dia

BrandSTANDARD LOCKNUT

Sign inAvailable

Steel bore-to-size chain coupling sprocket with a 2 in round keyed bore and 2 31/32 in hub diameter. Designed for use with keyed shafts in power transmission systems such as conveyors and material handling equipment.

MARTIN Bore to Size Chain Coupling Sprocket

BrandMARTIN

Sign inAvailable

Precision ground rotary shaft made from 12L14 steel with a diameter of 5/16 in, overall length of 10 in, and a tolerance of -0.0002 in. Features chamfered ends and a hardness of 83HRB. Suitable for use in linear motion systems, conveyor drives, and automation equipment where accurate shaft alignment and wear resistance are required.

ONDRIVES.US Inch 12L14 Steel Precision Ground Rotary Shaft

BrandONDRIVES.US

Sign inAvailable

MXV4 Section Lawn & Garden V-Belt, 139 in outside length, 1/2 in top width, 5/16 in thickness, Bare Back Fabric construction. Designed for outdoor power equipment such as riding mowers, tractors, and zero-turn mowers, suitable for deck drive and transmission applications.

MEGADYNE MXV4 Section Lawn & Garden V-Belt MXV4-1390

BrandMEGADYNE

Sign inAvailable

Closed-loop trapezoidal timing belt with 5 mm pitch, 25 mm top width, 82 teeth, and 410 mm outside length. Suitable for positive-drive power transmission in industrial machinery, packaging equipment, and conveyor systems requiring accurate synchronization and minimal slip.

MEGADYNE 25T5/410 T5 Section Trapezoidal Timing Belt

BrandMEGADYNE

Sign inAvailable

GATES PowerGrip GT3 Timing Belt 112-2MGT-04

BrandGATES

Sign inAvailable

This flanged sleeve bearing is made from SAE 841 bronze, a self-lubricating material suitable for moderate loads and speeds. It has a 40 mm bore, 46 mm outer diameter, and 20 mm length, with an operating temperature range of -35°F to 300°F. The flanged design aids axial location in housings. Sold as a pack of 2.

OILITE Flanged Sleeve Bearing: SAE 841 Bronze

BrandOILITE

Sign inAvailable

Mounting base for Dayton speed reducers. Features a 0.34-inch bolt circle diameter. Used to secure speed reducers in power transmission systems, providing stable support for gearboxes in conveyors, mixers, and other machinery.

Dayton Speed Reducer Mounting Base

BrandDayton

Sign inAvailable

One-piece clamp-on shaft collar with a 2 9/16 in bore diameter, made from 316 stainless steel. Inch-sized round design for secure mounting on shafts. Used to position components, prevent axial movement, or act as a mechanical stop in applications requiring corrosion resistance.

RULAND MANUFACTURING

RULAND MANUFACTURING CL-41-ST Stainless Steel Shaft Collar, 2 9/16 in Bore, 316

BrandRULAND MANUFACTURING

Sign inAvailable

Cast iron four-bolt flange unit with a 1 in cylindrical bore and eccentric collar locking. Lubricated with NLGI #2 equivalent grease. Mounting bolt size is 3/8 in. Used in conveyors, fans, and material handling systems for supporting rotating shafts.

TRITAN HCFU205-16 General Purpose Flange-Mount Ball Bearing

BrandTRITAN

Sign inAvailable

← Prev 1…1367 1368 1369 1370 1371…4547 Next →