Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1403 of 4547

This one-piece aluminum shaft collar has a 70 mm bore diameter and 19 mm collar width. The metric, round, clamp-on design provides secure mounting on shafts without marring the surface. Used to position components such as bearings, sprockets, or pulleys in power transmission assemblies.

RULAND MANUFACTURING

RULAND MANUFACTURING MCL-70-A Aluminum Shaft Collar, 70 mm Bore, 19 mm Width

BrandRULAND MANUFACTURING

Sign inAvailable

Two-piece sleeve coupling insert for connecting rotating shafts in power transmission systems. Rated for 31,500 in-lb torque, 50 hp, and 2,800 RPM max speed. Suitable for use with coupling size 12 in industrial machinery such as pumps and conveyors.

MASTERDRIVE 12HS Two-Piece Sleeve Coupling Insert

BrandMASTERDRIVE

Sign inAvailable

Steel male threaded fixed rod end with black oxide finish and right-hand threading. Thread size 3/8"-16, thread length 2 in. Used to connect rods or linkages to pivot points in industrial machinery, automation, and material handling systems for precise motion control and load transfer.

TE-CO Steel Male Threaded Fixed Rod End

BrandTE-CO

Sign inAvailable

This stainless steel male threaded fixed rod end features a plain design with left-hand threading. It has a 70 mm hole center-to-end length and a 7 mm eye thickness. Used in mechanical linkage systems such as actuators and conveyors, it provides a pivot point for industrial machinery requiring corrosion resistance.

AMPG ZEBM6X70-LH Stainless Steel Male Threaded Fixed Rod End

BrandAMPG

Sign inAvailable

This inch-type split taper bushing has a 1-5/8 in bore diameter and a 2.44 in bolt circle diameter, with a taper of 3/4 in per foot. It is used to mount components such as pulleys, sprockets, and couplings onto shafts in power transmission systems.

OEM Split Taper Bushing, Inch, 1-5/8 in Bore, 2.44 in Bolt Circle, P1X1-5/8

BrandOEM

Sign inAvailable

Cast-iron V-belt pulley with 6 grooves, 10.9 in outside diameter, and 10.5 in pitch diameter for C or CX belt sections. Bushed bore type F. Used in power transmission systems to transfer rotational motion via V-belts in industrial machinery.

OEM Bushed-Bore Cast-Iron V-Belt Pulley, 6 Groove, 10.9 in OD, C105

BrandOEM

Sign inAvailable

Ball-type insert bearing with 3/4 in bore and 1 27/32 in OD. Inch system of measurement. Suitable for food-grade applications in processing and packaging equipment where sanitation and corrosion resistance are required.

IPTCI BEARINGS SSER 204-12 W/ MPF 0696 Food-Grade Cylindrical Insert Bearing

BrandIPTCI BEARINGS

Sign inAvailable

This PRT Series fixed-center carriage, size 25, features an aluminum carriage and steel rollers. It is designed for guided linear motion along a slide ring track, supporting radial and axial loads in automated machinery, packaging equipment, and material handling systems.

BISHOP-WISECARVER

BISHOP-WISECARVER HepcoMotion PRT2 Slide Ring Carriage

BrandBISHOP-WISECARVER

Sign inAvailable

This high-precision clamp-on beam shaft coupling connects two shafts while accommodating up to 3° of angular misalignment. It features an 8 mm bore diameter 1 and a clamp-on attachment style. Typical applications include motion control systems such as servo motors, encoders, and linear actuators.

RULAND MANUFACTURING

RULAND MANUFACTURING High-Precision Clamp-On Beam Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

One-piece steel shaft collar with metric, round, clamp-on design. Bore diameter 32 mm, collar width 15 mm. Used for positioning and securing components on shafts in industrial machinery, conveyors, and automation equipment.

RULAND MANUFACTURING

RULAND MANUFACTURING MCL-32-F Steel Shaft Collar, 32 mm Bore, 15 mm Width

BrandRULAND MANUFACTURING

Sign inAvailable

← Prev 1…1401 1402 1403 1404 1405…4547 Next →